The AirTAC GC60025ALC2W AirTAC F.R.L. 3-Unit, PT1 in, 5 um Filter is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025ALC2W is a three-piece AirTAC GC-series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This configuration is built for a 1 inch PT port, uses the fine 5 um filter element (code W) to remove water and particulate, carries an automatic drain so collected condensate is expelled without manual attention, and is the low-pressure regulator type fitted with an external round gauge scaled in psi. The aluminium alloy bowls on this 600 size suit applications where polycarbonate is not preferred.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with a choice of drain type, 40 um or 5 um filtration, gauge style and scale, thread option and low-pressure or standard regulation, so a matching set can be built for most compressed-air lines. Flow is published as curves rather than a single rating; ask us to confirm the datasheet figures for your application on request.
| Model | GC60025ALC2W AirTAC F.R.L. 3-Unit, PT1 in, 5 um Filter |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact tools and air rings on a vehicle assembly line, with the 5 um element protecting tight-tolerance tooling and the automatic drain handling condensate on a long main.
Prepares the air feeding cylinders and grippers on a carton packaging conveyor, where the low-pressure regulator holds a gentle setting, the lubricator keeps seals and bores serviced, and the psi gauge lets line staff check at a glance.
Conditions instrument and process air on a chemical pilot plant, where the fine 5 um grade and aluminium bowls suit equipment that must stay free of water carryover and where a regulated, lubricated supply runs control valves.
Step up or down through the 200/300/400/600 sizes to match the port and flow demand of the line - this unit is the 600 size on a 1 inch PT connection. The 5 um element (W) suits downstream equipment that needs finer filtration than the 40 um standard; the automatic drain keeps the bowl clear where manual draining is impractical. The round gauge here reads in psi, and MPa or bar scales are available as alternatives. PT is the standard thread, with G (BSPP) and NPT available as order options, and a mounting bracket is included. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Tell us your line pressure and the air demand of your equipment and we will confirm the sizing from the datasheet curves on request.
The L in the code marks the low-pressure regulator type, chosen where the working setting sits below the standard range, and the A marks an automatic drain that expels condensate from the filter bowl by itself. The C2 adds a round gauge scaled in psi, and W sets the fine 5 um filter element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.