The AirTAC GC60025C2G AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025C2G is a genuine AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator set up as one complete air-treatment train. This configuration is the size 600 unit with a G1 (1 in) port in G thread, the standard 40 um filtration grade, a differential-pressure drain on the filter bowl, a standard regulator covering 0.15-0.9 MPa (20-130 psi), and a round gauge reading in psi. Because this is the 600 size, the filter bowl is aluminium alloy, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with port options from 1/8 in up to 1 in, G or NPT thread alternatives, automatic or manual drain choices, a 5 um filter grade option, and gauge scale choices in MPa, psi or bar. Flow is published by AirTAC as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC60025C2G AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a machine shop's compressed-air ring main that supplies tool clamping, chip-blowing and pneumatic actuators on CNC machining centres, with the water, particulate, pressure setting and oil mist handled in one pass.
Treating the air feeding cylinder-driven stops, pushers and lift gates on a bottling or canning conveyor system, where the regulator holds a steady setting for consistent cylinder stroke behaviour through the shift.
Conditioning the supply to impact wrenches, nutrunners and air balers at an automotive assembly station, delivering cleaned, regulated and lubricated air so the tools run as intended across a full production day.
Start with the port and size step: the 600 size carries a 1 in port and sits at the top of the GC range, so match it against the air demand of the line it will feed. Choose the drain to suit maintenance access: differential-pressure drain (as fitted here) bleeds the bowl automatically as flow passes, automatic drain suits unattended installations, and manual drain suits supervised points. The standard 40 um grade covers general plant air; the 5 um (W) grade is the option where finer particulate removal is needed. This unit carries a round gauge reading in psi; square embedded gauges and MPa or bar scales are the alternatives. PT is the standard thread, with G and NPT available as order options, and a bracket is included.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so ask us to confirm the flow figures against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote for the GC60025C2G. Tell us your application and air demand and we will confirm the flow figures from the datasheet on request before you order.
The GC60025C2G has a 1 in port in G (BSPP) thread, which is the order option coded by the trailing G in the model. PT is the standard thread for this family, and NPT is also available as an order option, so pick the thread that matches your pipework when you place the order.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.