The AirTAC GC60025C2GK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025C2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one filtration-regulation-lubrication package. This configuration is the size 600 unit with a G1 (1 in) port, a 40 um filter element and a differential-pressure drain on the filter bowl. Because the size 600 bowls are aluminium alloy, the filter body suits demanding plant air duty. The standard-type regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), a round gauge scaled in psi is fitted, and a reverse/check valve is included. A mounting bracket is supplied.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port options from 1/8 in up to 1 in, filter grades of 40 um (standard) or 5 um (code W), drain choices of differential-pressure, automatic or manual, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC60025C2GK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a factory compressed-air ring main, the three units condition the supply in one assembly: the filter strips water and particulate, the regulator holds a steady working pressure, and the lubricator mists oil to downstream tools.
On packaging lines with pneumatically actuated cylinders and grippers, the combination feeds clean, regulated, lubricated air so actuators move consistently through each shift and seals and cylinders are kept oiled.
At the inlet of machine-shop pneumatic panels serving impact tools, clamps and air motors, the unit gives each circuit one point of filtration, pressure adjustment and oil-mist lubrication, with the psi gauge giving operators a local pressure readout.
Choose the size step (200/300/400/600) and port against the air consumption of the machine or line being served - larger sizes carry larger ports and more flow, with flow published as curves rather than a single rating. On this unit the drain is differential-pressure; automatic (code A) and manual (code M) drains are the other decodable choices. Filter grade is 40 um standard, with 5 um (code W) available where finer particulate removal is needed. The gauge can be the embedded square type or an external round gauge, scaled in MPa, psi or bar - this configuration carries a round psi gauge. Thread is PT as standard with G (BSPP) and NPT as order options, and a reverse/check valve (code K) can be specified. Because flow figures are curves, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Tell us your application and operating pressure and we will confirm the datasheet flow curves and sizing for this 1 in (G1) unit on request.
The C2 code on GC60025C2GK specifies an external round gauge scaled in psi. The embedded square gauge is the standard fitting, and the round gauge is an optional choice with scales in MPa, psi or bar - so you can order the combination that matches the gauges already used on your plant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.