The AirTAC GC60025C2W AirTAC F.R.L. Combination Unit 1 in. PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025C2W is an AirTAC GC series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one treatment station. This configuration is built around a 1 in. PT port for high-flow compressed-air lines, with a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, and a round pressure gauge reading in psi. The 600 size filter and lubricator bowls are aluminium alloy, and the unit is supplied with a mounting bracket.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600, with port options from 1/8 in. up to 1 in., a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, gauge scale options, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC60025C2W AirTAC F.R.L. Combination Unit 1 in. PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A 1 in. F.R.L. station at the head of a body-shop ring main, cleaning and regulating the supply before it branches to impact wrenches, weld-clamp actuators and lift tables, while the lubricator feeds mist oil to the tool circuit.
Mounted at the inlet to a bottling plant's conveyor and filler-actuation air supply, where the 5 um element protects poppet valves from particulate and water carryover and the regulator holds a steady setting across the shift.
Installed where a mill or fabrication shop splits a large-bore air header into tool drops, giving each branch filtered, regulated and lubricated air for grinders, chippers and air motors on a 1 in. supply.
Start with the port and size step: this unit is the 600 size with a 1 in. PT connection, the largest step in the range, so size up or down against the air demand of the line rather than the pipe alone. The filter here carries the 5 um element; the standard grade is 40 um, so choose 5 um where downstream valves and cylinders need finer protection. Drain type is a real choice across the series: differential-pressure (as fitted here), automatic, or manual. The gauge scale (MPa, psi or bar) and the thread (PT standard, with G and NPT as order options) are also selectable, as is the bracket.
Flow for this series is published as curves, not a single rating, so we cannot quote one number here. Send us your application details and we will confirm the sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Tell us your line pressure and air demand and we will confirm the sizing from the datasheet on request before you order.
The W in the code GC60025C2W selects the 5 um element; the catalogue standard grade is 40 um. The 5 um grade suits circuits with sensitive valves and cylinders, while 40 um remains available on other GC configurations if coarser general-line protection is preferred.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.