The AirTAC GC60025C2WG AirTAC F.R.L. Combination, 1 in G Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025C2WG is an AirTAC GC600 three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This 600-size unit is built around a G1 (1 in) port, so it sits on the main air line of a large installation. The filter stage carries the 5 um element (code W) for finer water and particulate removal than the 40 um standard, with a differential-pressure drain that bleeds collected condensate away as the pressure drop across the bowl rises. The bowls on this size are aluminium alloy. The standard regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and a round gauge reading in psi is fitted to show the regulated line pressure. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include manual or automatic drains, the 40 um or 5 um element, gauges with MPa, psi or bar scales, G or NPT threads in place of the PT standard, and a reverse/check valve. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC60025C2WG AirTAC F.R.L. Combination, 1 in G Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Conditioning the main air line feeding a paint booth: the 5 um element strips water and particles that ruin finish quality, the regulator holds a steady spray pressure, and the lubricator mists oil to downstream air tools.
Feeding clean, regulated, lubricated air to the pneumatic clamps, tool changers and air cylinders on a machining centre, with the psi gauge letting operators set and check working pressure at a glance.
Supplying the filler, capper and conveyor cylinders on a beverage line; the differential-pressure drain keeps condensate moving out of the aluminium bowls during long production runs without a manual blow-down.
The real choices in this series are all decodable from the code. Step through sizes 200/300/400/600 and ports 1/8 in to 1 in to match the main line and the flow your system needs - the larger the size, the larger the port and the flow path. Choose the drain: differential-pressure (the default on this model), automatic, or manual. Choose the filter element: 40 um standard or 5 um (W) where finer cleanliness matters; this unit carries the 5 um element. Pick the gauge and its scale (MPa, psi or bar); this model carries a round gauge reading in psi. Threads come as PT as standard with G (BSPP) and NPT as order options - the trailing G here selects the G thread. A mounting bracket is included. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a figure here. Send us your line size and air demand and we will confirm the flow from the datasheet on request.
The W in the code selects the 5 um filter element instead of the 40 um standard, for finer removal of water and particulate. The trailing G specifies a G (BSPP) thread; PT is the standard thread and NPT is also available as an order option. Regulation range on this standard-type unit is 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.