The AirTAC GC60025C2WK AirTAC F.R.L. 3-Unit, PT1 in, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC600 series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This GC60025C2WK is built for 1 in PT ports and combines water and particulate removal at a fine 5 um grade, downstream pressure regulation from 0.15 to 0.9 MPa (20-130 psi), and oil-mist lubrication of connected equipment. The bowls on this size are aluminium alloy, the drain is the differential-pressure type, a round gauge with a psi scale is fitted, and a reverse/check valve is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with corresponding port sizes, and options include manual or automatic drains, a 40 um standard filter grade, different gauge scales, G or NPT threads and bracket choices. Flow is published as curves rather than a single rated figure, so contact us and we will confirm the datasheet figures for your application on request.
| Model | GC60025C2WK AirTAC F.R.L. 3-Unit, PT1 in, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
At the 1 in main drop feeding a mechanical stamping press, this three-unit set dries and filters the air to 5 um, holds a steady regulated pressure for the clutch and counterbalance circuits, and mists oil into the actuation air.
Installed where the plant main feeds a long conveyor section with many pneumatic cylinders, it removes water and fine particles, keeps regulator pressure stable across the run, and lubricates the cylinder seals in service.
On a bulk-delivery truck running compressor-fed discharge and tipping cylinders, the filter protects the valves from rust and scale, the regulator sets safe working pressure, and the lubricator keeps the cylinders moving smoothly.
Start with the size and port: this unit is size 600 with 1 in PT ports, the largest step in the GC range, so match it to the pipe bore and the air demand of the line it feeds. The filter here carries the fine 5 um element (code W); if your application only needs general protection, the 40 um standard grade is also available in this series. The drain is differential-pressure, which discharges collected condensate automatically when the pressure differential across the element is sufficient - no daily manual draining required. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are the other catalogue choices. Thread is PT as standard, with G (BSPP) and NPT available as order options. A mounting bracket is included and a reverse/check valve is fitted.
Because flow is published as curves rather than a single rated number, ask us to confirm sizing against your actual air consumption before ordering - we will pull the datasheet figure for you.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC600 series as curves, not as a single rated figure, so we do not quote a number here. Contact us with your air consumption and line pressure and we will confirm the datasheet flow figure for this exact unit on request.
The differential-pressure drain discharges condensate automatically as the element loads, so it suits installations that are not checked daily. The 5 um grade (code W) is the finer catalogue option over the 40 um standard, chosen where downstream valves and cylinders need finer protection. Both are decodable from the code GC60025C2WK.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.