The AirTAC GC60025F2 AirTAC F.R.L. Combination, PT1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025F2 is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one size-600 unit. This configuration is threaded PT1 (1 in, PT standard), filters to 40 um, drains the filter bowl by differential pressure, and regulates from 0.15-0.9 MPa (20-130 psi) with an embedded square gauge reading in psi. The size-600 bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard, G and NPT as order options), drains, filter grades, gauges and scales, so a matching unit can be specified for larger or smaller lines. Flow is published as curves rather than a single rating; ask us and we will confirm the datasheet figures for this model on request.
| Model | GC60025F2 AirTAC F.R.L. Combination, PT1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to spray booths and air-driven paint pumps on a body shop line, where water and particulate carried in the shop supply would otherwise ruin finish quality.
Supplying the pneumatic cylinders and gripper assemblies on a bottling conveyor, which need clean, regulated, oil-mist lubricated air to hold consistent stroke behaviour through long production runs.
Serving the shop-air drops that run pallet clamps, air chucks and blow-off nozzles on machining centres, with one combination unit conditioning the air at the point of use.
Sizing starts at the port: this unit steps up to PT1 (1 in) on the size-600 body, the largest step in the GC range, so match it against the air demand of the line rather than pipe size alone. Because flow is published as curves and not a single rating, send us your application conditions and we will confirm sizing against the datasheet before you order. The remaining choices are decodable from the code: drain type (differential-pressure as here, automatic, or manual), filter grade (40 um standard, 5 um with the W code), gauge scale (MPa, psi or bar), thread (PT standard; G and NPT as order options), and bracket.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the flow-curve and datasheet figures for this exact model on request.
The filter bowl in this configuration drains by differential pressure: condensate is expelled automatically when the pressure difference across the filter element builds sufficiently, with no manual intervention. Automatic (code A) and manual (code M) drains are also available in the series if your installation needs different behaviour.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.