The AirTAC GC60025F2G AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025F2G is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter, a pressure regulator and an oil-mist lubricator. This size 600 unit is configured for a G1 (1 in) port with G (BSPP) thread, carries the standard 40 um filter grade, and uses a differential-pressure drain on the filter bowl. The regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the embedded square gauge is fitted with a psi scale. Because this is the 600 size, the bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types (differential-pressure, automatic or manual), filter grades (40 um standard, 5 um optional), gauge scales (MPa, psi or bar) and G or NPT thread options. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | GC60025F2G AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a 1 in compressed-air main in an automotive assembly plant, the GC60025F2G removes water and particulate, holds a set working pressure for the air tools on the line, and carries oil mist to keep impact wrenches and nut runners lubricated through their shift.
On a bottling line, this three-unit set conditions the air feeding pneumatic cylinders that drive filler heads, capping heads and conveyor gates: the filter sheds condensate and dirt, the regulator pins the pressure for consistent cylinder stroke, and the lubricator protects the seals and moving parts.
Feeding the pneumatic clamps and tool-change cylinders of a CNC machining centre, the unit delivers clean, regulated, lubricated air at the pressure the fixture was designed for. The psi-scaled square gauge lets the setter verify set pressure at a glance, and the bracket mounts the set beside the machine.
Size 600 is the largest step in the GC range, pairing a 1 in port with the highest flow capacity of the family - the right choice when a large line or high-demand machine needs full treatment. Choose the drain type to suit the installation: this unit's differential-pressure drain bleeds the bowl automatically as flow passes, while automatic and manual drains are order options. The 40 um grade shown here is the standard element; specify the W code for the 5 um grade if downstream equipment needs finer filtration. The fitted square gauge reads in psi; MPa and bar scales are available instead, and an external round gauge is optional. Thread is G (BSPP) on this code, with PT standard and NPT orderable. A bracket is included for panel or wall mounting.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application's flow demand before ordering - we will pull the datasheet curve for the exact configuration.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote one number here. Tell us your application's flow demand and we will confirm the sizing from the datasheet curve for this exact configuration on request before you order.
This unit uses the differential-pressure drain, the GC series default: it bleeds collected condensate from the filter bowl automatically as air flows through, with no operator action. If your installation suits it better, automatic (code A) and manual (code M) drain versions are order options - just ask us to quote the alternative code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.