The AirTAC GC60025F2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025F2WG is an AirTAC GC series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one prepared air-supply station. This configuration is decoded as size 600 with a G1 (1 in) port in G thread, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain on the filter bowl, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, and an embedded square gauge reading in psi. At size 600 the filter bowl is aluminium alloy, and the set includes a mounting bracket. Max inlet pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with options including 40 um or 5 um filtration, differential-pressure, automatic or manual drains, MPa, psi or bar gauge scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so contact us and we will confirm the datasheet figures for your application on request.
| Model | GC60025F2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated, oil-misted air to the tool-clamping and chip-clearing circuits of a machining centre, with the 5 um element protecting tight-tolerance valves on a high-volume shop-air main.
A plant-air drop serving impact wrenches and pneumatic nutrunners on an assembly line: the regulator holds steady tool pressure while the lubricator keeps air motors running smoothly through double shifts.
Prepares air for the cylinders and gripper valves on a carton-forming and sealing machine, with the differential-pressure drain keeping condensate off the valve bank without operator intervention.
Size and port are the first choice: the 600 frame with its 1 in port suits the largest air demands in the GC range, while 200/300/400 frames step down to smaller ports and flows - match the frame to the flow your line actually needs rather than to pipe size alone. Next, set the drain: differential-pressure (as fitted here) bleeds the bowl automatically whenever the pressure drop across the element is high enough, while automatic and manual drains are the other catalogue choices. This unit carries the 5 um element (code W); the standard grade is 40 um, so choose 5 um where downstream equipment tolerates less particulate. The embedded square gauge here reads in psi; MPa and bar scales are also available. Thread is G on this code, with PT as the standard offering and G/NPT as order options, and a bracket is included.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a flow figure here. Ask us to confirm the datasheet flow against your application before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC family as curves rather than as a single rated figure, so we do not state a flow number here. Tell us your working pressure and air demand and we will confirm the datasheet flow figures for this unit on request before you order.
The W in the code GC60025F2WG selects the 5 um filter grade, the finer of the two catalogue options; the standard grade is 40 um. Choose 5 um when downstream valves and instruments need finer particulate removal, or order the plain code without W for the 40 um element - both are catalogue choices on the same frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.