The AirTAC GC60025LC2K AirTAC F.R.L. 3-Piece Unit PT1 Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025LC2K is an AirTAC GC-series three-piece F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-treatment station. This configuration is the 600 size with a PT1 (1 in) port in standard PT thread, a 40 um filter element with differential-pressure drain, a low-pressure regulator fitted with an external round psi gauge, and a reverse/check valve. It conditions compressed air in one pass - removing water and particulate, holding downstream pressure, and adding oil mist for tool and cylinder lubrication.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, drain choices, 40 um or 5 um filtration, gauge and thread options. Flow figures for this size are published as curves rather than a single rating, so we confirm the datasheet and sizing on request.
| Model | GC60025LC2K AirTAC F.R.L. 3-Piece Unit PT1 Low-Pressure |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a body-shop line where spray guns and air motors need filtered, regulated and lubricated air at a low setpoint, with the low-pressure regulator holding the downstream pressure the guns were set up for.
Conditioning the main air feed to conveyor stoppers, pushers and lift cylinders on a filling line, where the filter catches compressor carryover and the lubricator keeps the actuators running smoothly.
Serving a heavy-vehicle workshop's 1 in distribution ring, supplying impact wrenches, lifts and tyre cages from one F.R.L. station with a psi gauge the technicians can read directly.
Choose the 600 size with its PT1 port when your main air line steps up to 1 in and the flow demand matches the largest frame in the GC range - always check the published flow curve against your application rather than assuming from port size alone. This unit carries the 40 um standard element with a differential-pressure drain, which discharges collected condensate automatically as the pressure differential rises; if you prefer a set-and-forget automatic drain or a manual drain, those are orderable variants. The regulator here is the low-pressure type, and its exact adjustment range is not published in the sheet we work from - confirm it with us before ordering if your setpoint is critical.
The C2 code brings an external round gauge on a psi scale; embedded square gauges and MPa or bar scales are the other catalogue options. Thread is PT as standard, with G (BSPP) and NPT available to order, and the mounting bracket is included. Ask us to confirm sizing against the flow curves before you commit.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow and sizing from the datasheet on request before you order.
This GC60025LC2K carries the L (low-pressure) regulator type. The exact adjustment range for the low-pressure variant is not published in the sheet we work from, so please confirm the range with us on request if your setpoint matters. The standard GC regulator range does not apply to this low-pressure build.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.