The AirTAC GC60025LC2W AirTAC F.R.L. Combination, PT1, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025LC2W is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This size 600 configuration carries PT1 (1 in) PT ports, a 5 um filter element (code W), a differential-pressure drain on the filter bowl, a low-pressure type regulator, and a round pressure gauge reading in psi. At size 600 the bowls are aluminium alloy, and the mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, drain types, 40 um or 5 um filtration, gauge style and scale, and standard or low-pressure regulation. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC60025LC2W AirTAC F.R.L. Combination, PT1, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Cleaned, regulated and lubricated air for the machine tool's pneumatic clamps, tool changers and coolant-mist circuits, with the 5 um element protecting fine spool valves at the machine inlet.
Point-of-use preparation for carton sealers, wrap stations and stopper cylinders on a high-throughput packaging conveyor, keeping moisture and dirt out of the actuators while the lubricator feeds the air tools.
F.R.L. preparation at assembly-station air drops where impact wrenches, nut runners and pneumatic presses run continuously and each station needs its own regulation and oil feed.
Start with the port step: size 600 with 1 in PT ports is the largest in the GC range, so match the size to the air demand of the line - larger sizes carry more flow, and we can confirm the published flow curve for your duty before you order. This unit is already configured with 5 um filtration (the 40 um standard element is the alternative code), a differential-pressure drain, and a low-pressure type regulator - choose the low-pressure type only where the circuit works below the standard regulator range. The round gauge on this code reads in psi; square embedded gauges and MPa or bar scales are the other catalogue options. Thread is PT as standard, with G (BSPP) and NPT available to order, and the mounting bracket is included.
Because flow is published as curves and not a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and air demand and we will confirm the sizing against the datasheet on request before you order.
The L in the code GC60025LC2W marks the low-pressure type regulator, intended for circuits that work below the standard regulator range. If your line runs at ordinary shop pressures, the standard-type GC600 code is the usual choice; we can confirm the right version for your set pressure on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.