The AirTAC GC60025LC2WK AirTAC F.R.L. Unit, PT1 in, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a filter, a regulator and a lubricator mounted together as one air-preparation set. This GC60025LC2WK is the size 600 unit with a 1 in PT port. The filter carries the fine 5 um element (code W) with a differential-pressure drain, the regulator is the low-pressure type with a round psi gauge fitted, and a reverse/check valve is included. At size 600 the bowls are aluminium alloy, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and options for thread (PT standard, G and NPT to order), drain type, filter grade, gauge style and scale. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GC60025LC2WK AirTAC F.R.L. Unit, PT1 in, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding spray guns and air-assisted equipment on a paint line, where filtered, regulated and lubricated air at a controlled low pressure supports consistent finish work across the booth.
Supplying air clamps, tool changers and part-ejection cylinders on a machining centre, with the 5 um element protecting fine pneumatic components and the lubricator feeding actuation air.
Preparing air for diverters, pushers and gripper cylinders on a high-cycle packaging conveyor, where one set handles filtration, pressure control and oil-mist lubrication for the whole drop.
Pick the size and port against the air demand of the line: this unit is size 600 with a 1 in PT port, the largest step in the range. Drain type is a real choice - differential-pressure (this unit), automatic (A) or manual (M). Filter grade is 40 um standard or 5 um (W, this unit). Gauge scale can be MPa, psi or bar - this unit reads psi on a round external gauge. Thread is PT as standard, with G (BSPP) and NPT available as order options. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so no single number can be quoted here. Tell us your line's air demand and we will confirm the flow figures from the datasheet for this 1 in, size 600 unit before you order.
This GC60025LC2WK carries the L code, so its regulator is the low-pressure type rather than the standard type, suited to applications that run at lower working pressures. The exact adjustment range for this configuration is not published in the catalogue, so confirm it with us against your set pressure. The unit also differs from standard by its 5 um filter, round psi gauge, reverse/check valve and differential-pressure drain.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.