The AirTAC GC60025LF2G AirTAC F.R.L. Combination G1 (1 in) Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025LF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This size-600 configuration carries a G1 (1 in) port with G thread, a 40 um filter element with differential-pressure drain, a low-pressure regulator fitted with an embedded square gauge scaled in psi, and an oil-mist lubricator. The filter removes water and particulate from compressed air, the regulator holds a stable downstream pressure, and the lubricator adds a controlled oil mist for downstream pneumatic tools and actuators. The 600-size bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades (40 um standard, 5 um with code W), gauge styles and scales, and PT, G or NPT threads. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm flow and datasheet details for your application before ordering.
| Model | GC60025LF2G AirTAC F.R.L. Combination G1 (1 in) Low-Pressure |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at a 1 in plant air drop, the set cleans water and scale from the compressed air main, holds a steady low working pressure for the line, and mists oil to keep air cylinders and valves on the assembly line running smoothly.
Feeding a pneumatic press or clamping fixture station, the filter protects directional valves from particulate, the low-pressure regulator sets the clamping pressure, and the lubricator extends the service life of the press cylinders.
Mounted on the air supply to a conveyor or packaging machine, the unit dries and filters the supply, regulates it to the pressure the machine controls expect, and lubricates the actuator circuits that drive diverters, pushers and grippers.
Start with the port: this unit is G1 (1 in) on the 600 frame, the largest size in the GC range, so step down to 200/300/400 if your line uses smaller ports and lower air demand. The filter uses the standard 40 um element (5 um is the W option) with a differential-pressure drain; automatic (A) and manual (M) drains are orderable alternatives. The regulator here is the low-pressure type (code L); its exact adjustment range is not published in our sheet, so confirm it with us against your working pressure. The square gauge is scaled in psi (code 2); MPa and bar scales and an external round gauge are options. Thread is G (BSPP); PT is the standard thread and NPT is also an orderable option. Flow for the series is published as curves, not a single rating, so send us your air demand and let us confirm sizing before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the G series as performance curves, not as a single rated figure, so we do not quote a number here. Tell us your air demand and line pressure and we will confirm the flow and datasheet figures for this exact configuration on request before you order.
L marks the low-pressure type of regulator in this GC combination. It is fitted with an embedded square gauge scaled in psi. The exact adjustment range of the low-pressure type is not published in our datasheet extract, so confirm the range with us against your working pressure. Standard-type GC units are also available if you need the standard range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.