The AirTAC GC60025LF2K AirTAC F.R.L. Combination, PT1 in is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025LF2K is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built into one GC600 unit for 1 in (PT1) ports. This configuration carries a 40 um filter element with a differential-pressure drain, a low-pressure type regulator with an embedded square gauge scaled in psi, a reverse/check valve, and an included mounting bracket. Because this is size 600, the filter and lubricator bowls are aluminium alloy. It runs on compressed air at up to 1.0 MPa (145 psi) inlet and -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, drain choices of differential-pressure, automatic or manual, a 5 um (W) filter element option, gauge scales in MPa, psi or bar, and G (BSPP) or NPT thread options to order. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC60025LF2K AirTAC F.R.L. Combination, PT1 in |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a 1 in tool drop that supplies impact wrenches, nutrunners and air ratchets on a final assembly line: the filter stage strips water and pipe scale, the low-pressure regulator holds the tool circuit at its setpoint, and the lubricator carries oil mist to the tools.
Conditioning the air feeding pneumatic pushers, gates and clamping cylinders along a bottling or carton conveyor, where a single filtered, regulated and lubricated supply at the conveyor drop keeps the actuators running shift after shift.
Installed at the main compressed-air drop of a machine shop, the 40 um element removes water and particulate from the header supply, the regulator sets the shop circuit pressure, and the lubricator feeds downstream air motors and presses.
The real choices in this series are the size and port step - 200, 300, 400 or 600, with ports from 1/8 in to 1 in - which you set against the air demand of your line; we confirm exact flow from the datasheet curves on request because no single rated figure is published. Drain type is selectable: differential-pressure (as on this model), automatic or manual. Filter grade is 40 um standard or 5 um with code W. The embedded square gauge is standard with MPa, psi or bar scales, and an external round gauge is optional. Thread is PT as standard here, with G (BSPP) and NPT available as order options; a mounting bracket is included. This unit is the low-pressure (L) regulator type - its exact regulation range is not published, so confirm the setpoint coverage with us if that matters to your application.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number on the page. Send us your operating pressure and air demand and we will confirm the sizing from the datasheet before you order.
It marks the low-pressure type of regulator in this GC unit, instead of the standard type fitted on other GC models. It is chosen for circuits with lower setpoints; the exact regulation range for the low-pressure type is not published, so confirm it with us if your setpoint is critical.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.