The AirTAC GC60025MC2G AirTAC F.R.L. Combination Unit, G1 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC60025MC2G is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter, a pressure regulator and an oil-mist lubricator. This size-600 unit carries a G1 (1 in) port with G thread, a manual drain on the filter bowl, a 40 um standard filter element, and a round pressure gauge reading in psi. The maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, a 5 um (code W) filter element option, gauge scale choices of MPa, psi or bar, and PT, G or NPT thread options. Flow is published as curves rather than a single rated figure, so we confirm the datasheet figures for your application on request.
| Model | GC60025MC2G AirTAC F.R.L. Combination Unit, G1 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a large plant air ring main, the filter removes water and particulate, the regulator holds a steady line pressure for downstream tools, and the lubricator feeds oil mist to impact wrenches and nut runners along the line.
Mounted ahead of a CNC machining cell, this combination conditions the shop air supply so pallet clamps, tool changers and pneumatic actuators receive filtered, regulated and lubricated air at a set pressure, with the psi gauge giving operators a local reading.
Fitted on the air supply to a packaging or bottling line, the unit protects and feeds the cylinders and air-driven grippers that move cartons and bottles, with the 1 in port suiting the high draw of a full conveyor section and the manual drain suiting a supervised daily check routine.
Start with the size and port step: size 600 with a 1 in port is the largest step in the GC range, so match it against the air demand of the line it feeds - flow is published as curves, not a single rating, so ask us to confirm sizing before ordering. This configuration has a manual drain, which means an operator opens the drain periodically to expel collected water; if you prefer automatic or differential-pressure draining, those are decodable options in the series. The filter element here is the 40 um standard grade; specify code W if the application needs the 5 um fine grade. The gauge in this code is the external round type with a psi scale, and MPa or bar scales are also available. Thread choices are PT (standard), G or NPT, and a mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your application's air demand and working pressure and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code selects the manual drain on the filter bowl: collected water is expelled by opening the drain by hand at intervals you set. Automatic and differential-pressure drain options are available in the GC series if you would rather not rely on a manual routine.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.