The AirTAC GC60025MC2WGK AirTAC F.R.L. 1 in G Thread Unit is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one supply unit. This GC600 configuration is sized for 1 in ports with G (BSPP) threads, carries a 5 um filter element for finer water and particulate removal, and uses a manual drain on the filter bowl. The bowls on this size are aluminium alloy, a round external gauge reading in psi is fitted, and a reverse/check valve is included to hold downstream pressure if the supply drops. Regulation range is 0.05-0.9 MPa (7-130 psi) with a maximum inlet pressure of 1.0 MPa (145 psi), and the unit operates from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, PT standard threads (G and NPT available as order options), drain choices, 40 um or 5 um filtration, gauge styles and scales, and an optional reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC60025MC2WGK AirTAC F.R.L. 1 in G Thread Unit |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A 1 in F.R.L. feeding a manifold of impact wrenches, nutrunners and air ratchets on a vehicle assembly line: the 5 um element keeps fine particulate out of the tools, the regulator sets tool pressure, and the lubricator mists oil into the tool air supply.
A central supply point for pneumatic cylinders and grippers on a bottling or carton-packing line: filtered, regulated and lubricated air in one unit, with the check valve holding the circuit's setting if the plant air dips during a compressor changeover.
Mounted on the bracket inside a press or material-handling machine's control cabinet, this unit conditions the whole machine air feed: 5 um filtration for the directional valves, a psi gauge for operator-visible setting, and oil mist for the cylinder seals.
Start with the port step: this unit is the 600 size at 1 in, the largest in the range, so step down to 400/300/200 if your line runs at lower demand. On drainage, manual drain means someone bleeds the filter bowl on a routine; choose automatic or differential-pressure drain codes if the unit sits where regular manual attention is impractical. Filtration is 5 um here (code W); the 40 um standard element suits general supply, while 5 um better protects finer valves and cylinders. The fitted round gauge reads in psi; square embedded gauges and MPa or bar scales are the other catalogue choices. Thread is G (BSPP) on this code, with PT as the standard and NPT available to order. A bracket is included for mounting. Because flow is published as curves and not a single rated figure, send us your demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so there is no one figure we can honestly quote. Tell us your line demand and operating pressure and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code specifies a manual drain: the filter bowl is bled by hand on a maintenance routine, which suits attended installations. If the unit will sit unattended, the catalogue offers automatic (A) and differential-pressure (blank) drain codes on the same 600 size, and the bowl on this size is aluminium alloy.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.