The AirTAC GC60025MF2 AirTAC F.R.L. Combination 1 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MF2 is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 1 in (PT1) unit. This configuration carries a manual drain on the filter bowl, a 40 um standard filter element, a standard regulator with a 0.05-0.9 MPa (7-130 psi) adjustment range, and a fitted embedded square gauge reading in psi. At size 600 the bowls are aluminium alloy, and the set includes a mounting bracket; no reverse/check valve is fitted.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options include automatic or differential-pressure drains, a 5 um filter element (code W), external round gauges with MPa, psi or bar scales, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GC60025MF2 AirTAC F.R.L. Combination 1 in PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A 1 in F.R.L. at the head of a body-shop ring main filters water and swarf from compressed air, holds a set regulator pressure for impact tools and lifts, and meters oil mist to pneumatic actuators downstream.
On a bottling hall's conveyor and gripper cylinders, the filter stage removes condensate and particles, the regulator stabilises supply pressure between shifts, and the lubricator feeds the cylinders' seals.
At a wastewater treatment plant, large quarter-turn butterfly valves run on plant air; this three-unit set cleans the supply, sets the actuator pressure on the psi gauge, and lubricates the actuator pistons.
Size 600 is the largest step in the GC range, with a 1 in PT port suited to high-consumption air lines; step down to 200/300/400 if your flow demand is lower, since the published flow curves - not a single rating - define the right size. Drain choice matters: this unit has a manual drain, so an operator or auto-drain point must remove accumulated water; automatic (code A) and differential-pressure (blank) drains are available on other codes. The 40 um element fitted here is the standard grade; specify code W for 5 um where finer filtration is needed. The square gauge is fitted in a psi scale; MPa and bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT as order options, and a mounting bracket is included. Because flow is published as curves rather than one rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC600 as curves, not as a single rated number, so we do not quote a l/min, m3/h or SCFM figure. Send us your line pressure and air consumption and we will confirm the flow figures from the datasheet for your application before you order.
The M in GC60025MF2 specifies a manual drain on the filter bowl, so condensate is removed by opening the drain by hand. If you prefer unattended water removal, GC600 codes with an automatic drain (A) or the differential-pressure drain (blank) are available in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.