The AirTAC GC60025MF2G AirTAC F.R.L. Unit, 1 in G Thread is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This size 600 configuration carries a 1 inch G-threaded port, a 40 um filter element, a manual drain on the filter bowl, and a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi) with an embedded square gauge scaled in psi. Because the size 600 bowls are aluminium alloy, the filter bowl suits installations where a polycarbonate bowl is not preferred. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is published in sizes 200, 300, 400 and 600, with port options from 1/8 to 1 inch, a choice of differential-pressure, automatic or manual drain, a 5 um (code W) filter element option, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC60025MF2G AirTAC F.R.L. Unit, 1 in G Thread |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Cleaned, regulated and lubricated air feeding the tool-clamp and actuator circuits of a CNC machining centre, with the 1 inch port matching the main drop from the shop air ring main.
Conditioning compressed air at the entrance to a paint line's air panel, removing water and particulate ahead of the regulator and oil-mist lubrication for air tools used in masking and finishing.
Filtering, regulating and lubricating the air feeding cylinders and grippers on a carton-forming and palletising conveyor line, with manual drain suited to a supervised maintenance routine.
Start with the port and size step: this unit is size 600 with a 1 inch G thread, the largest step in the GC range, so match it against the air demand of the circuit - flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering. Choose the drain type: this configuration has a manual drain, meaning the bowl must be drained by hand at intervals; automatic and differential-pressure drain versions are available if you prefer not to rely on manual attention. The filter grade here is the standard 40 um element; specify the W option for a 5 um element where finer particulate removal is needed. The embedded square gauge is scaled in psi; MPa and bar scales, and an external round gauge, are alternatives. Thread is G (BSPP) on this unit; PT is the standard thread and NPT is also an order option. A mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a flow number for this unit. Tell us your application and air demand and we will confirm the sizing against the datasheet curves on request before you order.
The M in the model code GC60025MF2G specifies a manual drain on the filter bowl, so condensate is drained by hand at intervals. If you prefer unattended condensate removal, the GC series is also available with automatic (code A) or differential-pressure (blank) drain - ask us for those variants.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.