The AirTAC GC60025MF2GK AirTAC F.R.L. Combination, G1 (1 in) Port, G is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MF2GK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This size-600 unit is built around a G1 (1 in) port with G thread, and this configuration carries a manual drain on the filter bowl, the standard 40 um filter element, an embedded square gauge reading in psi, a reverse/check valve on the regulator, and a mounting bracket. It filters water and particulate from compressed air, holds a set downstream pressure, and adds oil mist for tool and actuator lubrication.
This is a genuine AirTAC part in the largest of the GC sizes (200, 300, 400 and 600), with options across the range including 5 um filtration (code W), automatic or differential-pressure drains, alternate gauge scales (MPa/psi/bar) and PT or NPT thread. At size 600 the wetted bowls are aluminium alloy. Published flow data appears as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC60025MF2GK AirTAC F.R.L. Combination, G1 (1 in) Port, G |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds a bank of impact wrenches and nutrunners at a final assembly station: the filter strips water and scale from the header supply, the regulator holds a steady setting for consistent fastening, and the lubricator keeps the tools oiled through a full shift.
Prepares the air feeding clamps and pallet-locating cylinders on a CNC machining cell, holding fixture pressure steady from a plant header that swings, while the manual drain lets the operator clear collected condensate at shift start.
Conditions the air supplying case-erectors and conveyor diverters on a carton-packing line, where the check valve holds the set pressure against upstream dips and the lubricator extends the life of the line's cylinders and valves.
Size 600 with a G1 (1 in) port is the top step of the GC range, so size up to it when your line's air demand sits beyond what a 3/4 in unit can carry - and let us check the published flow curve against your consumption before you order, since there is no single rated figure. This unit has a manual drain: an operator opens the bowl drain periodically, which suits attended installations; choose the automatic drain option if the unit sits where nobody walks past. The 40 um element is the standard grade for general plant air; the 5 um (W) element is the choice for finer downstream protection. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is optional. Thread here is G (BSPP); PT is the standard and NPT is an order option. The reverse/check valve is fitted, and the mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a l/min or SCFM figure. Send us your line pressure and air consumption and we will confirm the datasheet curve for this G1 (1 in) unit on request before you order.
The M in the code specifies a manual drain: an operator opens the filter bowl drain to release collected water. If the unit will sit in an unattended spot, the same size 600 GC combination can be ordered with an automatic drain (code A) or the differential-pressure drain (blank) instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.