The AirTAC GC60025MF2WGK AirTAC G1 F.R.L. Combination Unit is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MF2WGK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This size-600 configuration carries a G1 (1 in) port with G thread, a 5 um filter element (code W), a manual drain on the filter bowl, and a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi). The embedded square gauge reads in psi, and a reverse/check valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, and can be ordered with drain type, filter grade, gauge scale, thread (PT standard; G and NPT as options) and reverse valve to suit the installation. Because flow is published as curves rather than a single rating, we confirm the datasheet and flow figures for your application on request.
| Model | GC60025MF2WGK AirTAC G1 F.R.L. Combination Unit |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a factory compressed-air ring main, the set filters water and particulate from the plant supply, holds a stable regulated pressure for downstream users, and carries oil mist to air-fed tools and actuators on the same line.
Feeding the air service of a CNC machining centre, the combination cleans the supply to 5 um, regulates the pressure to the machine's specified setpoint, and lubricates the pneumatically actuated tool-change and clamping circuits.
Mounted at the head of a packaging or bottling line, the unit conditions the air feeding cylinder-driven diverters, fillers and case packers, with the manual drain emptied during scheduled line cleaning and the check valve holding the circuit against backflow.
Size 600 is the largest step in the GC range, with a 1 in port, so start there when the line demand is at the top of the range and step down to 200/300/400 if the port and flow allow. This unit is already configured with a manual drain and a 5 um element; if the installation cannot be attended for draining, ask about the automatic or differential-pressure drain variants, and note that 40 um is the standard grade if finer filtration is not required. The square gauge is fitted with a psi scale; MPa and bar scales are also available.
Thread here is G (BSPP); PT is the catalogue standard and NPT is also an order option, so match the thread to the piping before ordering. A reverse/check valve is fitted on this unit and the mounting bracket is included. Flow for this series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your line pressure, downstream demand and allowable pressure drop, and we will confirm the sizing and the datasheet flow curve for the GC600 against your application on request.
Manual drain means the filter bowl is emptied by hand, which suits installations visited on a regular maintenance round; automatic and differential-pressure drain variants exist if the unit cannot be attended. In this code, W selects the 5 um filter element (40 um is standard) and K confirms a reverse/check valve is fitted. The gauge is the embedded square type with a psi scale, and the bowls on this size-600 unit are aluminium alloy.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.