The AirTAC GC60025MLC2GK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MLC2GK is a three-piece AirTAC F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one GC600 set. This size 600 unit is made for a G1 (1 in) port with G (BSPP) thread, carries a 40 um filter element, a manual drain on the filter bowl, a low-pressure type regulator, a round gauge reading in psi, and a reverse/check valve fitted. The filter and lubricator bowls are aluminium alloy, as is the case for the 600 size. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options including differential-pressure, automatic or manual drains, a 5 um (W) filter element, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application.
| Model | GC60025MLC2GK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to impact wrenches, pneumatic clamps and air balancers on 1 in main air drops along an assembly line.
Conditioning supply air for the cylinders and air motors that index, stop and divert bottles on a filling and packaging conveyor.
Supplying clean, regulated, lubricated air to bench-mounted pneumatic presses and clamping fixtures, protecting cylinder seals from water and dirt.
Choose the size and port step (200/300/400/600, 1/8 in to 1 in) against the air demand of your circuit; this unit is the 600 size with a G1 (1 in) G-thread port. The filter bowl drain is differential-pressure by default, automatic with code A, or manual with code M - this set has the manual drain. Filter grade is 40 um standard or 5 um with code W (this set is 40 um). The regulator here is the low-pressure type (L); its exact adjustment range is not published, so confirm it with us. Gauges are an embedded square gauge or an external round gauge in MPa, psi or bar scales; this set carries a round psi gauge. Threads are PT as standard, with G and NPT as order options, and a mounting bracket is included. Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and sizing from the datasheet on request.
The M in the code specifies a manual drain, so the filter bowl is drained by hand; automatic (A) and differential-pressure (default) drains are available on other codes. The L specifies the low-pressure type regulator, whose exact adjustment range is not published, so ask us to confirm it. This set also carries a round psi gauge and a reverse/check valve (code K).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.