The AirTAC GC60025MLF2 AirTAC F.R.L. Combination, 1 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60025MLF2 is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This configuration is the size 600 unit with a 1 in PT port, a 40 um filter element, a manual drain on the filter bowl, a low-pressure type regulator and an embedded square gauge scaled in psi. The filter bowl on this size is aluminium alloy, and the unit ships as specified with a mounting bracket. In use, it removes water and particulate from the compressed air, holds a set downstream pressure, and adds oil mist for air-tool and actuator lubrication in one installation.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, a 40 um standard or 5 um (W) filter grade, differential-pressure, automatic or manual drains, and gauge choices with MPa, psi or bar scales; G (BSPP) and NPT threads are catalogue options to order. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC60025MLF2 AirTAC F.R.L. Combination, 1 in PT |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact wrenches, nutrunners and pneumatic clamps on a vehicle assembly line, protecting tools from water and debris while keeping them oiled.
Conditions the shop-air supply for a large CNC machining cell, removing condensate and particulate before it reaches pallet clamps, tool-change cylinders and other actuators on the machine.
Supplies treated air to cylinder-driven gates, moulds and press equipment at a concrete products plant, where heavy particulate loads and moisture in the compressed air are a daily problem.
Start with the size and port: the 600 size with a 1 in PT port suits lines plumbed at 1 in, and the smaller 200/300/400 sizes step down in port and capacity if your supply line is smaller. Drain type is a real choice: this unit has a manual drain, which needs someone to open it periodically; automatic and differential-pressure drains are available in the series if you want unattended water removal. Filter grade is 40 um as standard here, with the 5 um (W) grade available where finer particulate removal is needed. The gauge on this unit is the embedded square type scaled in psi, with MPa or bar scales and an external round gauge as options. Thread is PT as standard; G (BSPP) and NPT are order options. This is the low-pressure type regulator, so confirm its adjustment range against your set pressure before ordering. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Send us your application details and we will confirm the flow figures from the datasheet on request before you order.
This configuration is coded with a manual drain, which means the filter bowl is emptied by opening the drain periodically. The GC series is also available with an automatic drain or the default differential-pressure drain if you prefer water removal without manual attention; choose based on how often the site can service the unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.