The AirTAC GC60025MLF2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one air-treatment set. This configuration, GC60025MLF2WG, is the size 600 unit with a G1 (1 in) port, G (BSPP) thread, a 5 um filter element (the fine grade; 40 um is the standard option), a manual drain on the filter bowl, the low-pressure regulator type, an embedded square gauge with psi scale, and the mounting bracket included. The filter bowl on size 600 is aluminium alloy. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). No reverse/check valve is fitted.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with a choice of port sizes, thread options (PT standard; G and NPT as order options), drain types, filter grades, gauge scales and standard or low-pressure regulation. Flow is published in the catalogue as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | GC60025MLF2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A filtered, regulated and lubricated air supply at 1 in ports feeding high-consumption impact wrenches and nut runners along a vehicle assembly line, with the 5 um element protecting tools from water and fine particulate.
Conditioning the air that drives conveyor stop-gates, pushers and lift cylinders on a packaging line, where the lubricator keeps cylinder seals running smoothly through long production shifts.
Supplying treated air to clamping and forming fixtures on a metalworking press line, with the low-pressure regulator holding a controlled setting and the psi gauge giving operators a direct local reading.
Size 600 is the largest step in the GC range, and this unit carries a G1 (1 in) port; step up or down through 200/300/400/600 to match port size and required flow. The filter grade here is the 5 um fine element (code W); the 40 um standard element is the alternative if coarser filtration is acceptable. The drain on this unit is manual, meaning the bowl must be drained by hand; automatic and differential-pressure drains are available on other configurations. The regulator is the low-pressure type; the exact adjustment range for this variant is not published, so confirm it with us. The gauge is the embedded square type with psi scale; MPa and bar scales and an external round gauge are options. Thread is G (BSPP) here, with PT as the standard and NPT available to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves in the catalogue, not as a single rated figure, so we do not quote a number. Tell us your application and required flow and we will confirm sizing against the datasheet on request before you order.
The M in the code means the filter bowl has a manual drain, so condensate is emptied by hand as part of routine checks. Automatic and differential-pressure drain options are available on other GC configurations if you prefer the bowl to discharge without operator attention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.