The AirTAC GFR200-06 AirTAC Filter Regulator NPT1/8, 5 um, Bar Gauge is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06 is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one compact body. This 200-size unit has a 1/8 in NPT port, a 5 um filter element for finer filtration than the standard 40 um grade, a manual drain on the polycarbonate bowl, an embedded square gauge scaled in bar, and a built-in reverse (check) valve so downstream pressure is held if the supply drops. It regulates across 0.05-0.9 MPa (7-130 psi) and is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drains, 40 um or 5 um elements, and gauge scales in MPa, psi or bar. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Rated flow is published as curves rather than a single figure, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR200-06 AirTAC Filter Regulator NPT1/8, 5 um, Bar Gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Clean, regulated air for solenoid and air-pilot valves on a packaging machine's pick-and-place station, with the built-in check valve holding actuator pressure during supply dips.
Point-of-use air prep for the tool-clamp and unclamp circuit on a small machining centre, where the 5 um element protects the clamping valve from fine contamination.
Regulated air for diverter gates and stop cylinders on a distribution-centre conveyor line, with the bar-scaled gauge giving operators a local set-point check.
Size and port set the flow capacity: the 200 series with its 1/8 in NPT port suits compact point-of-use drops; step up to 300, 400 or 600 when the line demands more air. Drain choice matters: this unit has a manual drain, which also widens the regulation range to 0.05-0.9 MPa (7-130 psi); automatic or differential-pressure drains suit unattended installations. The 5 um element (code W) is the finer option over the standard 40 um grade - choose it where downstream valves and cylinders need cleaner air. The embedded square gauge here is scaled in bar; MPa and psi scales are available, and an external round gauge is an option. Thread is NPT on this unit; PT (the standard) and G (BSPP) versions can be ordered, and the J code means no mounting bracket is included. Flow is published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes filter-regulator flow as performance curves rather than a single rated figure, so no one number is quoted here. Tell us your required flow and working pressure and we will confirm sizing against the datasheet on request.
The M code fits a manual drain: condensate is released by hand, which suits attended stations and also widens the regulation range to 0.05-0.9 MPa (7-130 psi). For unattended installations, the automatic or differential-pressure drain versions are the better choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.