The AirTAC GFR200-06MJC2GK AirTAC Filter Regulator, G1/8, Manual Drain is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06MJC2GK is a size-200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration carries a G1/8 (BSPP) port, a manual drain on the polycarbonate bowl, a 40 um filter element, a round psi gauge fitted, and a built-in reverse (check) valve. Maximum inlet pressure is 1.0 MPa (145 psi), the operating temperature range is -5 to 70 C (non-freezing), and with manual drainage the regulation range is 0.05-0.9 MPa (7-130 psi).
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, PT as the standard thread and G or NPT as order options, plus a choice of manual, automatic or differential-pressure drains, 40 um or 5 um (W) filtration, gauge styles and MPa/psi/bar scales. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet for your application.
| Model | GFR200-06MJC2GK AirTAC Filter Regulator, G1/8, Manual Drain |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Mounted ahead of directional control valves on a packaging line, this unit strips water and particles from the plant air supply and holds a set downstream pressure so valve islands shift consistently through every cycle.
On a bottling or carton conveyor, the GFR200-06MJC2GK feeds pusher and stopper cylinders with clean, regulated air at a fixed setting, while the built-in check valve holds the circuit if the upstream supply drops.
At a maintenance bench, this compact unit provides a filtered, regulated 1/8 in take-off point for air tools and test rigs, with the psi gauge for direct setting and the manual drain for end-of-day blowdown.
Size and port: 200 is the smallest G-series size, here with a 1/8 in G-thread port; step up to 300, 400 or 600 when your line needs a larger port and more flow. Drain: this unit is manual - you empty the bowl by hand, which suits lines checked regularly; choose automatic or differential-pressure drain for unattended operation. Filtration: the 40 um element is standard; specify W for 5 um where finer protection is needed. Gauge: a round psi gauge is fitted here; embedded square gauges and MPa/psi/bar scales are the alternatives. Thread: G (BSPP) on this unit, with PT standard and NPT available to order. No mounting bracket is included (code J). Flow is published as curves, not a single rating - ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR performance as flow curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and air demand and we will confirm the datasheet and curve for this exact unit before you order.
Manual drain (code M) means you open the drain by hand to empty collected water - simple and dependable on lines that are checked regularly; automatic or differential-pressure drains suit unattended installations. The K code adds a reverse (check) valve that helps hold downstream pressure if the supply is interrupted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.