The AirTAC GFR200-06MLC1T AirTAC Filter Regulator NPT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06MLC1T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is the 200 size with a 1/8 in NPT port, built as the low-pressure (L) type with a 40 um filter element and a manual drain, so the bowl is emptied by hand as part of routine maintenance. A round MPa pressure gauge and a mounting bracket are included, the bowl is polycarbonate (PC), the maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, plus options for automatic or differential-pressure drains, a 5 um element (code W), alternative gauge scales, and G (BSPP) or NPT threads in place of the PT standard. AirTAC publishes flow as curves rather than a single rated figure, so we confirm flow and other datasheet figures for your application on request.
| Model | GFR200-06MLC1T AirTAC Filter Regulator NPT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding low-pressure clamping and swing-cylinder circuits on machining and assembly fixtures, where filtered air and a stable reduced pressure hold parts in place without damaging surfaces.
Supplying filtered, regulated air to carton sealers, labellers and small packaging actuators that run at reduced pressure and need water and dirt kept out of the valves.
Regulating air to laboratory automation and test-rig actuators that operate at low set pressures and need clean, moisture-free air for repeatable cylinder and gripper motion.
The main choice is size and port: 200 through 600 step up in port and flow capacity, so match the size to the air demand of the circuit - we can check the published flow curves against your requirement before you order. This unit is the low-pressure (L) type; its exact regulation range is not published, so tell us your set pressure and we will confirm suitability. The drain is manual here; automatic (A) and differential-pressure (blank) versions exist if you would rather not drain by hand. The 40 um element is standard and a 5 um (W) element is optional. The round MPa gauge is fitted; the embedded square gauge and psi or bar scales are alternatives. Thread is NPT on this model; PT is the standard and G (BSPP) is also an order option. A mounting bracket is included.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and required flow and we will confirm sizing against the datasheet curves before you order.
The M in the code means the polycarbonate bowl is drained by hand: open the drain as part of routine maintenance to empty the collected water. If you prefer, the same unit is available with an automatic (A) or differential-pressure (blank) drain - ask us and we will confirm the alternative code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.