The AirTAC GFR200-06T AirTAC Filter Regulator, NPT 1/8 in, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a filter regulator: one body that removes water and particulate from compressed air and then regulates downstream pressure. This 200-size unit is fitted with a 1/8 in NPT port, a manual drain bowl in polycarbonate, and a 40 um standard filter element. It is the low-pressure type, so it is intended for circuits that run at reduced pressure rather than full line pressure, and it carries a round external gauge scaled in bar so the set pressure can be read directly at the unit.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in. Across the series you can choose manual, automatic or differential-pressure draining, a 40 um or 5 um element, different gauge scales, and PT, G or NPT threads. We confirm flow and other datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GFR200-06T AirTAC Filter Regulator, NPT 1/8 in, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
On a jig or fixture that clamps workpieces at reduced pressure, the GFR200-06T filters the supply air and holds the set clamping pressure, with the bar-scale gauge letting the setter read the clamp setting at a glance.
Packaging lines run small cylinders for diverting, rejecting and stopping product. This filter regulator cleans the air feeding those actuators and regulates it to the pressure the mechanism was designed for, with manual drain suiting a line that is checked each shift.
Test benches and lab apparatus often need clean, low-pressure air rather than full shop supply. The low-pressure type GFR200-06T with its 1/8 in NPT port and visible bar gauge gives a compact, readable feed point for such rigs.
Start with the port step: this unit is 1/8 in NPT, so check it against your line size and the flow your circuit needs - larger GFR sizes carry larger ports for higher flow. The manual drain here means an operator opens the bowl drain to expel collected water, which suits points that are checked regularly; choose automatic or differential-pressure draining where the unit is hard to reach. The 40 um element is the standard grade for general air preparation; specify the W code for a 5 um element where finer filtration is needed. The gauge on this unit reads in bar; MPa and psi scales are also available. Thread is NPT here, with PT as the catalogue standard and G (BSPP) as an alternative - all are order options, not delivery promises. A mounting bracket can be ordered for this size.
One honest note before you order: AirTAC publishes flow as curves, not as a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you commit.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, downstream pressure and expected air demand, and we will confirm the flow and sizing against the datasheet on request before you order.
The M in the code specifies a manual drain: collected water is expelled by opening the bowl drain by hand, which suits units that are inspected regularly. The GFR series is also available with automatic draining (code A) or differential-pressure draining (the default, blank code) where the unit is mounted somewhere that is not checked often. This unit also carries the L code, meaning it is the low-pressure type for circuits running at reduced pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.