The AirTAC GFR200-06T AirTAC Filter Regulator NPT1/8, 40 um, psi Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in a single compact body. This configuration has a 1/8 in NPT port, the standard 40 um filter element, a differential-pressure drain that bleeds collected condensate automatically as flow passes through, an embedded square gauge reading in psi, and a built-in reverse (check) valve so downstream pressure is retained when the supply is shut off. A mounting bracket is included.
This is a genuine AirTAC part from the GFR200 size class, one of four sizes (200/300/400/600) with port options from 1/8 in to 1 in and thread choices of PT (standard), G (BSPP) or NPT. Maximum inlet pressure is 1.0 MPa (145 psi), the regulation range for this drain type is 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR200-06T AirTAC Filter Regulator NPT1/8, 40 um, psi Gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Clean, regulated air feeding solenoid valves and pneumatic clamps on a small CNC machining centre, with the check valve holding clamp pressure if the shop air drops.
Point-of-use air preparation for the pick-and-place and sealing cylinders on a carton packaging line, where steady regulated pressure keeps cycle timing consistent.
Conditioning the compressed air feeding purge air and actuated valves in a laboratory analyser enclosure, with 40 um filtration protecting sensitive downstream components.
Start with the port step: the 200 size carries 1/8 in ports, and the larger the size, the larger the port and the greater the flow capacity - match the size to the air demand of the circuit rather than to the pipe alone. Choose the drain type next: this unit uses the differential-pressure drain (default); an automatic drain (code A) or manual drain (code M) is available, and the manual-drain version widens the regulation range down to 0.05 MPa. The standard element is 40 um; specify code W for the 5 um grade if downstream equipment needs finer filtration. Gauge scale is selectable (MPa, psi or bar) and this unit carries the square gauge reading in psi; the check valve (code K) is already fitted. Thread here is NPT, with PT standard and G (BSPP) also orderable, and the bracket is included.
One honest note on sizing: AirTAC publishes flow as curves, not as a single rated figure, so we do not quote a flow number here. Send us your application details and we will confirm the datasheet flow curve and sizing before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR200 as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the datasheet flow curve and check the sizing against your air demand before you order.
The K in the model code means a reverse (check) valve is fitted, so downstream pressure is retained when the upstream supply is shut off - useful for clamping and holding circuits. The embedded square gauge on this unit reads in psi (code 2); MPa or bar scales are available, and an external round gauge can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.