The AirTAC GFR200-06T AirTAC Filter Regulator NPT1/8 5 um psi gauge is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a size-200 filter regulator: it removes water and particulate from compressed air and holds a regulated downstream pressure in one body. This configuration is ordered with a 1/8 in NPT port, a 5 um filter element (the finer of the two catalogue grades), a differential-pressure drain that bleeds collected condensate automatically whenever the pressure differential is high enough, a fitted reverse/check valve that holds downstream pressure if the supply is lost, and an external round gauge reading in psi. Maximum inlet pressure is 1.0 MPa (145 psi), the standard regulator setting range is 0.15-0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, embedded square or external round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR200-06T AirTAC Filter Regulator NPT1/8 5 um psi gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding a compact clamp cylinder on a bench fixture: the 5 um element keeps fine particulate out of the clamp valve, the regulator holds the clamping pressure, and the check valve keeps the clamp from venting if shop air drops.
Supplying regulated air to gauges, testers or small pneumatic instruments at a test bench, where the 5 um grade and a local psi gauge give a cleaner, readable supply at a 1/8 in connection.
Regulating and filtering the air to one small actuator or air jet on a packaging line, with the differential-pressure drain handling condensate without daily manual blowing-down.
Size and port are the first decodable choice: 200 is the smallest GFR frame and this unit carries a 1/8 in NPT port, so step up to 300/400/600 if the line's air demand is beyond what a 1/8 in connection is sized for. The 5 um element (code W) suits points of use that want finer particulate removal than the 40 um standard; the differential-pressure drain needs no operator action but the bowl should be watched on wet lines, and automatic or manual drains are orderable alternatives. The round psi gauge is fitted here; embedded square gauges with MPa, psi or bar scales are the catalogue alternative. The T suffix orders NPT threading instead of the PT standard (G/BSPP is also available), and this code omits the mounting bracket. Flow for the GFR series is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Tell us your line pressure and the air demand of the equipment you are feeding, and we will confirm the datasheet flow curve and check the 1/8 in size against your application before you order.
The W in the code orders the 5 um filter element instead of the 40 um standard, giving finer particulate removal, and the K orders a reverse/check valve that holds downstream pressure if the upstream supply fails. Both are catalogue options on the GFR filter regulator; the 40 um grade and a unit without the check valve are available if you prefer.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.