The AirTAC GFR20006C2T AirTAC Filter Regulator 1/8" NPT is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006C2T is a size 200 GFR filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration has a 1/8 in NPT port, standard 40 um filtration, a differential-pressure drain, an external round gauge with a psi scale, and a mounting bracket included. The polycarbonate bowl lets you see condensate at a glance, and the standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, automatic, manual or differential-pressure drains, an optional 5 um filter element (code W), square or round gauges with MPa, psi or bar scales, and a low-pressure regulator option. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR20006C2T AirTAC Filter Regulator 1/8" NPT |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Mounted on the pneumatic manifold of a form-fill-seal machine, this 1/8 in NPT filter regulator gives the pilot valves and control circuit a single point of clean, moisture-limited air at a set pressure, with the psi gauge visible on the panel door.
Installed just ahead of the pop-up diverters and stop cylinders on a sorting conveyor, the GFR20006C2T strips condensate and 40 um particulate from the branch line and holds the actuator pressure steady through the shift.
On a bench-top test stand fed from a shop-air drop, this compact filter regulator conditions the supply to pressure transducers and small air bearings, with the differential-pressure drain keeping the polycarbonate bowl clear without manual bleeding.
Start with the port: this unit is 1/8 in NPT, and the GFR series steps up through 1/4, 3/8, 1/2, 3/4 and 1 in across sizes 200 to 600, so pick the size whose flow curve covers your demand. Next choose the drain: differential-pressure (this model, drains only when the pressure drop builds), automatic for unattended condensate removal, or manual where you bleed by hand. Filtration is 40 um standard; specify the W option for 5 um when downstream equipment needs finer protection. Gauges come as an embedded square gauge or an external round gauge (as here), with MPa, psi or bar scales. Threads can be ordered in PT (standard), G (BSPP) or NPT, and a bracket can be included or omitted (code J).
Because flow is published as curves and not a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so there is no one figure we can quote. Tell us your line pressure and air demand and we will confirm the flow from the datasheet curves for this exact 1/8 in NPT size 200 unit before you order.
C is the external round gauge option and 2 is the psi scale, so this unit ships with a round psi gauge fitted. The embedded square gauge is the standard alternative, and MPa or bar scales are also available - just order the matching code suffix.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.