The AirTAC GFR20006C3T AirTAC Filter Regulator, NPT1/8, 40 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006C3T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit has a 1/8 in NPT port, a 40 um standard filter element and a differential-pressure drain that bleeds collected condensate automatically as flow passes through. The fitted round gauge reads in bar, the standard regulator covers 0.15-0.9 MPa (20-130 psi) of set pressure, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the polycarbonate bowl suits the -5 to 70 C (non-freezing) operating range, and the medium is compressed air only.
This is a genuine AirTAC part from the GFR200 series. GFR filter regulators are available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, PT as the standard thread and G or NPT as order options, plus a choice of differential-pressure, automatic or manual drain, a 5 um element (code W), and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR20006C3T AirTAC Filter Regulator, NPT1/8, 40 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds and regulates the air to a machining center's clamping fixtures, with the 40 um element stopping scale and pipe debris from reaching the clamp cylinders and the bar gauge giving the setter a local pressure readout.
Sits upstream of a packaging machine's directional-valve manifold, delivering clean, regulated air at a stable set pressure so cylinder stroke timing and bag-seal actuation stay repeatable shift after shift.
Installed at the drop to a paint-line spray station, filtering water and particles out of the plant air line before the gun and holding the atomizing pressure where the coating spec calls for it.
Size the GFR by port and expected flow: this 200-size unit carries a 1/8 in NPT port, the smallest step in the range, with 300/400/600 sizes stepping up to 1 in for higher demand. Because flow is published as curves and not as a single rated figure, ask us to confirm sizing against your application before ordering. Other decodable choices: drain type (differential-pressure as here, automatic, or manual - note the manual-drain version widens the adjustment range to 0.05-0.9 MPa / 7-130 psi), filter grade (40 um standard, 5 um with code W), gauge scale (MPa, psi or bar - this unit is bar), thread (PT standard; G and NPT as order options - this unit is NPT), and bracket. A mounting bracket is included with this configuration.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so there is no one l/min or SCFM number we can honestly quote. Send us your line pressure and demand and we will confirm the flow and datasheet figures for this unit on request before you order.
The blank drain code on this model means a differential-pressure drain: condensate is expelled automatically whenever the flow differential is high enough, with no operator attention. If you prefer full automatic purging at low flow, choose code A; if you want manual control, choose code M - note the manual-drain version also widens the regulator adjustment range to 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.