The AirTAC GFR20006F1T AirTAC Filter Regulator, NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006F1T is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is threaded 1/8 in NPT, carries a 40 um standard filter element, drains condensate by differential pressure, and includes an embedded square gauge scaled in MPa so the set pressure is always visible at the unit. The standard-type regulator covers a setting range of 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi), and the polycarbonate bowl suits operating temperatures from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, optional 5 um (W) filtration, automatic or manual drains, psi or bar gauge scales, and G or NPT thread variants. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR20006F1T AirTAC Filter Regulator, NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds a small clamping cylinder on a machining fixture: the 40 um element keeps scale and water out of the valve, and the regulator holds a steady set pressure so clamp force stays repeatable.
Point-of-use prep on a cartoning or wrapping line: clean, regulated air at the machine drop protects the sealing and actuation circuit, with the MPa gauge letting operators verify the set point at a glance.
Conditions the air feeding bench-top test rigs and pneumatic sample handling: particulate and moisture are stripped at the 40 um element while the regulator holds the low set pressures these instruments need.
Start with the port step: this unit is 1/8 in NPT on the 200 size, so step up to GFR300/400/600 if your line needs a larger port and more flow capacity. Choose the drain to match access: differential pressure (this model) bleeds condensate automatically with flow, manual suits supervised points, and automatic (code A) suits unattended drops. Pick 40 um for general air prep or 5 um (W) for finer protection. Gauge scale is MPa here; psi (2) and bar (3) are orderable, and an external round gauge is optional. Thread is NPT on this code; PT is the standard and G (BSPP) is a catalogue option to order. A mounting bracket is included. Because flow is published as curves rather than one rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a rated flow, Cv or l/min figure for this unit. Send us your line pressure, set pressure and expected air demand, and we will confirm the sizing from the datasheet on request before you order.
This model's blank drain code is the differential-pressure type: condensate is discharged automatically as flow passes through the unit, with no operator action needed. If the unit sits on an infrequently used line where bleed-through is unreliable, or you prefer a supervised drain point, the manual drain (code M) or fully automatic drain (code A) are orderable options on the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.