The AirTAC GFR20006JC2GK AirTAC Filter Regulator G1/8, 40 um, psi Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006JC2GK is a GFR-series filter regulator: it removes water and particulate from compressed air and holds downstream pressure in one compact body. This unit is built on the GFR200 size with a G1/8 (BSPP) port, a 40 um standard filter element and a differential-pressure drain that discharges collected condensate when the flow-driven pressure differential acts on it. An external round gauge scaled in psi is fitted for direct setting, and a reverse (check) valve is built in so downstream pressure is held if the supply dips.
This is a genuine AirTAC part from the G-series air-treatment line, which spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, PT as the standard thread and G or NPT as order options. The bowl on this size is polycarbonate, maximum inlet pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C, non-freezing. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR20006JC2GK AirTAC Filter Regulator G1/8, 40 um, psi Gauge |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use filtered and regulated air for a CNC machine tool's pneumatic clamps and tool-changing cylinders. The built-in check valve holds the downstream setting if shop-air pressure dips mid-cycle.
Clean, pressure-stabilised air for the cylinders and grippers on a carton or shrink-wrap packaging line, with the 40 um element keeping debris and condensed water out of the valves.
Filtered, regulated air feeding lab analysers or pilot-plant control valves, where the round psi gauge gives a direct local reading and the check valve protects the instrument from supply drops.
Choose the GFR200 size when your line's port and flow sit at the small end of the range: this unit gives a G1/8 port on the 200 body, and stepping up to GFR300, GFR400 or GFR600 moves you to larger ports and more flow. With the differential-pressure drain fitted here, the regulation range is 0.15-0.9 MPa (20-130 psi); a manual-drain version widens the adjustable range down to 0.05 MPa if you need lower setpoints. Filter grade is 40 um as built, with a 5 um element available under code W where finer filtration matters. The gauge on this unit is the external round type scaled in psi; an embedded square gauge and MPa or bar scales are the alternatives. Thread is G (BSPP) on this unit, PT is the range standard and NPT is orderable, and the J code means no mounting bracket is included. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR200 size as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet curve and check the sizing against your flow demand before you order.
It means a reverse (check) valve is fitted. If upstream supply pressure falls, the check valve holds the regulated downstream pressure instead of letting it bleed back, which protects the circuit on this unit. Other GFR variants without the K code are supplied without the check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.