The AirTAC GFR20006LC2T AirTAC Filter Regulator, NPT 1/8, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
GFR20006LC2T is an AirTAC GFR200 filter regulator: compressed-air filtration and pressure regulation combined in one compact body. This configuration is the 200 size with a 1/8 in NPT port, the standard 40 um filter element for removing water and particulate, and a differential-pressure drain that discharges collected condensate automatically as the pressure differential builds, with no manual draining routine. The regulator is the low-pressure type, and a round gauge with a psi scale is fitted so the downstream setting can be read directly. The polycarbonate bowl is rated for a maximum inlet pressure of 1.0 MPa (145 psi) and the unit operates from -5 to 70 C in non-freezing conditions. A mounting bracket is included.
This is a genuine AirTAC part. The GFR filter-regulator family is available in sizes 200, 300, 400 and 600 with stepped port sizes, a choice of differential-pressure, automatic or manual drain, an optional 5 um element (code W), gauge scales in MPa, psi or bar, and PT, G or NPT threads. Published flow data is given as curves rather than a single rated figure, so we confirm the exact datasheet figures for your application on request.
| Model | GFR20006LC2T AirTAC Filter Regulator, NPT 1/8, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds filtered, regulated air to paint or coating spray guns on a finishing line, where the low-pressure regulator type and a psi-reading gauge let the operator hold the light setting spray work calls for while the 40 um element keeps water and grit out of the gun.
Sits ahead of the clamping circuit on a bench or fixture, filtering the shop air and holding a steady low regulated pressure so toggle and swing clamps grip consistently through the shift, with the differential-pressure drain handling condensate unattended.
Conditions the supply to small air cylinders and diverters along a packaging conveyor, removing moisture and particles before the valves and protecting the actuators with a stable low-pressure setting read directly off the fitted psi gauge.
Start with the port step: the 200 size carries the 1/8 in port here, and moving to 300, 400 or 600 buys larger ports and more flow capacity, so match the size to the air demand of the circuit rather than only the existing fitting. This unit uses the differential-pressure drain, which suits installations that are not easily reached for draining; an automatic drain (code A) or a manual drain (code M) can be selected instead if the duty calls for it. The 40 um element is the standard grade; specify the W option for 5 um filtration where downstream components need finer protection. The fitted round gauge reads in psi; MPa or bar scales are available. Thread is NPT here, with PT as the catalogue standard and G (BSPP) also offered. A mounting bracket is included, and the L code marks this as the low-pressure regulator type - its exact regulation range is not published in our sheet, so confirm it with us against your set pressure before ordering. Because flow is published as curves and not a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves, not as a single rated figure, so there is no one number we can quote honestly. Send us your line pressure and the air demand of your circuit and we will confirm the sizing from the datasheet curves on request before you order.
The L marks the low-pressure regulator type, intended for applications regulated below the standard range; the exact regulation range is not published in our sheet, so confirm it with us against your set pressure. This unit also carries the differential-pressure drain, which discharges collected condensate automatically as the pressure differential builds - automatic (A) and manual (M) drain versions are available if your duty needs them.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.