The AirTAC GFR20006LJC2K AirTAC Filter Regulator 1/8 PT, Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006LJC2K is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This unit is the GFR200 size with a PT1/8 (1/8 in) port, a 40 um standard filter element and a differential-pressure drain that clears condensate as air flows through. The regulator is the low-pressure type, and the code specifies a fitted round gauge reading in psi plus a built-in check valve that blocks reverse flow; no mounting bracket is included.
This is a genuine AirTAC part. The GFR family runs in 200, 300, 400 and 600 sizes, with PC bowls on 200-400 and aluminium alloy on 600, a maximum inlet pressure of 1.0 MPa (145 psi) and an operating range of -5 to 70 C (non-freezing). Options across the series include a 5 um element (code W), automatic or manual drains, G or NPT threads and gauge scales in MPa, psi or bar. Rated flow is published only as curves, so ask us to confirm sizing figures from the datasheet before you order.
| Model | GFR20006LJC2K AirTAC Filter Regulator 1/8 PT, Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds filtered, low-pressure regulated air to pneumatic grippers on a robotics cell; the 40 um element protects seals and the check valve blocks reverse flow at the regulator.
Regulates air to cylinder-driven stops and pushers on a bottling conveyor; the differential-pressure drain clears condensate as air flows, and the psi gauge gives a readable setpoint.
Supplies cleaned, low-pressure regulated air to bench-top test rigs; the round psi gauge supports careful setting where lower regulated pressures are required.
Choose the size by port and flow: GFR200 sits at the small end of the 200/300/400/600 range, here with a 1/8 in PT port. Pick the drain: differential-pressure (this unit), automatic (A) or manual (M). Pick the element: 40 um standard or 5 um with code W. Gauge choices are the embedded square gauge or an external round gauge in MPa, psi or bar scales - this code carries a round psi gauge. Thread is PT as standard; G (BSPP) and NPT are orderable options. No mounting bracket is included on this code (J). Because rated flow is published as curves rather than a single figure, send us your application and we will confirm sizing against the datasheet before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the sizing from the datasheet on request.
The L in GFR20006LJC2K marks the low-pressure regulator variant, intended for circuits that need lower regulated pressures than the standard type. The exact adjustment range for this variant is not published in our data, so ask us to confirm it on request. The unit also carries a check valve (K) that blocks reverse flow through the regulator.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.