The AirTAC GFR20006MC2TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MC2TK is a size-200 filter regulator that removes water and particulate from compressed air and sets downstream pressure in a single compact body. This configuration has a 1/8 in NPT port, a manual drain bowl in polycarbonate, a 40 um standard filter element, and a round pressure gauge reading in psi. A reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part from the GFR series, which spans sizes 200 to 600 with port sizes from 1/8 in to 1 in and thread options in PT, G (BSPP) and NPT. Drain types, filter grades and gauge scales are selectable across the range. Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GFR20006MC2TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filtered, regulated air holds a consistent clamp force on a jig or fixture. The 40 um element keeps swarf-laden shop air out of the clamp cylinder, and the psi gauge lets the setter read and lock the clamp pressure directly.
Pick-and-place and pusher cylinders on packaging conveyors need clean, steady-pressure air to cycle predictably. This unit conditions the supply at the drop, and the reverse/check valve helps hold the set pressure against supply dips.
Test rigs and lab benches drawing air for small actuators or air bearings benefit from particulate- and water-free supply at a set pressure. The manual drain suits a station that is bled down at the end of each shift.
Start with the size and port: GFR200 is the smallest step in the GFR range, and stepping up through 300, 400 and 600 raises both port size and flow capacity, so match the unit to the air demand of the circuit rather than the port alone. This unit carries a manual drain, which suits installations where an operator can bleed the bowl on a routine; an automatic or differential-pressure drain is available if the unit will be left unattended. The 40 um element is the standard grade; specify code W for a 5 um element where finer filtration is needed.
Gauge choice is decodable too: the embedded square gauge is standard and this code specifies an external round gauge on a psi scale (MPa and bar scales are also available). Thread is NPT here, with PT as the standard option and G (BSPP) also orderable. A bracket is included with this unit. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The M in the code specifies a manual drain bowl, which you bleed by hand on a routine. If the unit will be installed where nobody opens the drain regularly, the GFR series is also available with an automatic drain (code A) or a differential-pressure drain (blank) - just ask for the equivalent code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.