The AirTAC GFR20006MF2TK AirTAC Filter Regulator NPT 1/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06 is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration has a 1/8 in NPT port, a manual drain bowl in polycarbonate, a 40 um standard filter element, an embedded square gauge with psi scale, a built-in reverse/check valve, and a mounting bracket included. The manual drain lets an operator bleed accumulated condensate from the bowl on a chosen schedule, and the standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, optional 5 um filtration (code W), automatic or differential-pressure drains, MPa/psi/bar gauge scales, and G or NPT thread options. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
| Model | GFR20006MF2TK AirTAC Filter Regulator NPT 1/8 in |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds a bench-top pneumatic press with filtered, pressure-regulated air at the point of use, with the psi gauge giving the operator a direct local readout and the check valve holding the set pressure against upstream fluctuation.
Conditions the air feeding the pick-and-place cylinders on a packaging line, removing water and particulate before it reaches seals and valves while the regulator holds a stable working pressure for repeatable motion.
Serves a single air tool or torque driver on an assembly bench, combining water and dirt removal with adjustable downstream pressure in one body, and the manual drain fitting a bench that is bled down at shift end.
Start with the port step: size 200 with a 1/8 in NPT port suits compact point-of-use drops, while sizes 300, 400 and 600 step up in port and flow capacity. Choose the drain to match maintenance practice: manual (this unit) for scheduled bleeding, automatic for hands-off condensate removal, or the differential-pressure default. Filter grade is 40 um as standard; specify code W for 5 um where finer protection is needed. The gauge is an embedded square type; psi scale on this unit, with MPa and bar scales available, and an external round gauge as an option. Thread is NPT here; PT is the catalogue standard and G (BSPP) is also an order option. A bracket is included on this unit.
Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Ask us and we will confirm the datasheet flow curve for the GFR200 at your operating conditions before you order.
The M in the code specifies a manual drain: an operator opens the drain to bleed accumulated condensate from the bowl on a schedule. If you prefer hands-off condensate removal, the GFR series is also available with an automatic drain (code A) or the differential-pressure drain (no code), which drains on a pressure drop.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.