The AirTAC GFR20006MF2W AirTAC Filter Regulator PT1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MF2W is a size-200 filter regulator: it removes water and particulate from compressed air and holds a regulated downstream pressure in one compact body. The 06 port code gives a PT 1/8 in connection (G and NPT threads are order options), the W code selects the finer 5 um filtration element instead of the 40 um standard, and the M code specifies a manual drain you operate by hand to empty the PC bowl. The F2 codes give the embedded square gauge with a psi scale, and the regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi) for this manual-drain configuration. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR filter-regulator family spans sizes 200, 300, 400 and 600 with matching port sizes, a choice of drain type, 40 um or 5 um filtration, gauge scale options and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so we confirm the datasheet figures for your application on request.
| Model | GFR20006MF2W AirTAC Filter Regulator PT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding clean, regulated air to the pneumatic clamps and tool-change cylinders on a machining centre, with the 5 um element protecting fine pilot valves from particulate.
Regulating supply pressure to the stopper cylinders and diverters on a bottling or cartoning conveyor, with the square psi gauge giving operators a direct setpoint readout.
Supplying stable, filtered air to analytical instruments or purge cabinets in a lab, where the compact 1/8 in port and fine 5 um filtration suit small, sensitive consumers.
Start with the size and port: GFR200 is the smallest step in the GFR range, with a PT 1/8 in connection here - step up to 300/400/600 if your line needs larger ports and more flow. This unit is pre-configured with the finer 5 um element (choose it when downstream equipment is sensitive to finer particles; the 40 um standard suits general supply), and a manual drain, which suits positions that are checked regularly - pick automatic or differential-pressure drain codes where the bowl cannot be emptied by hand. The square gauge is fitted with a psi scale; MPa and bar scales and an external round gauge are alternatives. PT is the standard thread; G (BSPP) and NPT are catalogue options to order. A mounting bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated number, so we do not quote a figure here. Tell us your application and we will confirm the relevant flow and datasheet figures for this 1/8 in, 5 um configuration on request before you order.
The M code in GFR20006MF2W selects a manual drain: condensate collected in the PC bowl is emptied by operating the drain by hand, which suits positions that are checked as part of a routine. If the installation is not visited regularly, ask us about the automatic or differential-pressure drain variants of the same filter regulator.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.