The AirTAC GFR20006MJC1T AirTAC Filter Regulator, NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC1T is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This size 200 unit is fitted with a 1/8 in NPT port, a manual drain on the polycarbonate bowl, and the standard 40 um filter element. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi) for this manual-drain configuration, and an external round pressure gauge with an MPa scale is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). No mounting bracket is supplied with this code and no reverse/check valve is fitted.
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in. Across the series you can order automatic, manual or differential-pressure drains, a 5 um element (code W), gauge scales in MPa, psi or bar, PT, G (BSPP) or NPT threads, and bracket options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR20006MJC1T AirTAC Filter Regulator, NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeds and regulates the air supply to a small clamping or fixture circuit on a machining cell, where clean, moisture-reduced air at a set pressure holds workpieces consistently.
Supplies filtered, regulated air to the cylinders that drive diverters, pushers and sealing heads on a packaging line, with the manual drain emptied during routine changeover.
A compact filter-regulator point at a maintenance bench or assembly drop, giving hand-held air tools clean air at a stable, operator-set pressure from a 1/8 in NPT takeoff.
Start with the port and size step: this unit is size 200 with a 1/8 in NPT port; larger sizes (300/400/600) carry larger ports and higher flow capacity, so step up if your line demand exceeds what a 1/8 in circuit can carry. Drain choice matters: this code has a manual drain, which you drain by hand; automatic or differential-pressure drains are available on other codes if you cannot schedule manual draining. The filter grade here is the standard 40 um; specify the W code for a 5 um element where finer filtration is needed. The included round gauge reads in MPa; psi and bar scales are orderable, and an embedded square gauge is the series standard. Thread options are PT (standard), G (BSPP) and NPT, and the bracket position on this code is J (no bracket). Flow for G-series units is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the relevant datasheet figures on request before you order.
The M in the code specifies a manual drain: moisture collected in the polycarbonate bowl is released by hand, which suits lines drained on a schedule. If you need unattended condensate removal, the same series is available with automatic or differential-pressure drains on other codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.