The AirTAC GFR20006MJC2WT AirTAC Filter Regulator NPT1/8 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006MJC2WT is an AirTAC GFR200 filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in a single compact body. This configuration has a 1/8 in NPT port, a 5 um filter element, a manual drain on the polycarbonate bowl, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), and a round pressure gauge reading in psi. No mounting bracket is fitted and no reverse/check valve is included.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and options for manual, automatic or differential-pressure drains, 40 um or 5 um elements, gauge style and scale, PT/G/NPT threads and mounting brackets. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
| Model | GFR20006MJC2WT AirTAC Filter Regulator NPT1/8 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Feeding filtered, regulated air to a machining center's tool-changer and clamping valves. The 5 um element protects the directional valves from particulate and water, the manual drain is bled at shift start, and the psi gauge lets the setter verify the clamp-pressure setpoint.
Supplying steady pressure to the cylinders and vacuum ejectors on a packaging line's carton sealer. The regulator holds a consistent setpoint as demand cycles, the round psi gauge gives operators a quick visual check, and the manual drain clears collected condensate during changeover.
Conditioning the air feeding a small robotic gripper station. The 5 um element keeps fine debris out of the gripper's pilot valves, the regulator pins the grip pressure so parts are held consistently, and the compact size-200 body mounts close to the cell without a bracket.
Size and port set the air capacity: this unit is size 200 with a 1/8 in NPT port, the smallest step in the GFR range - step up to 300, 400 or 600 if your circuit draws more air. Drain choice matters: a manual drain needs periodic bleeding, an automatic drain discharges condensate on its own, and the differential-pressure default limits the regulation span to 0.15-0.9 MPa, whereas this unit's manual drain allows the wider 0.05-0.9 MPa (7-130 psi) setting. Filter grade is 5 um here (code W); the 40 um element is the standard choice for general plant air. Gauge style and scale are selectable - this one is a round gauge in psi, with embedded square gauges and MPa/bar scales available. Thread is NPT; PT (the standard) and G are order options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your line pressure, downstream demand and acceptable pressure drop, and we will confirm the sizing from the datasheet on request.
A manual drain needs someone to bleed the bowl periodically, which suits points of use checked daily; automatic or differential-pressure drains suit unattended installations, and the manual drain also permits the wider 0.05-0.9 MPa (7-130 psi) regulation span. The 5 um element (code W) is the finer option for sensitive valves and actuators, while 40 um is the standard grade for general plant air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.