The AirTAC GFR20006MJC2WTK AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJC2WTK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, in one compact body. This configuration is the 200 size with a 1/8 in NPT port, the finer 5 um filter element, a manual drain on the PC (polycarbonate) bowl, an external round pressure gauge reading in psi, and a built-in reverse/check valve. Maximum inlet pressure is 1.0 MPa (145 psi) and, with the manual drain, the regulating range is 0.05-0.9 MPa (7-130 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with 40 um standard or 5 um filtration, differential-pressure, automatic or manual draining, an embedded square gauge or an external round gauge in MPa, psi or bar scales, an optional reverse/check valve, and PT, G or NPT threads. Flow for this family is published as curves rather than a single rating, so ask us to confirm the sizing figures from the datasheet for your application.
| Model | GFR20006MJC2WTK AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use conditioning for the small gripper and slide cylinders on an electronics assembly cell: the 5 um element guards valve seals against particulate and water carryover while the regulator holds a steady actuation pressure, and the check valve holds the circuit if upstream supply dips.
Conditioned air for the sealing-jaw and flap-fold cylinders on a packaging line: the regulator keeps jaw pressure consistent from cycle to cycle, and the manual drain lets an operator clear accumulated condensate at the start of each shift.
Clean, regulated air for fixtures and test actuators on a lab bench: the 5 um grade suits sensitive instrumentation, the round psi gauge gives a direct local reading, and the compact 200 size fits tight panel space behind the bench.
The real choices on this family: step through sizes 200/300/400/600 and ports 1/8 to 1 in as your flow demand grows; pick the drain - manual (as here, which also gives the widest 0.05-0.9 MPa regulating range), automatic, or the differential-pressure default; choose 40 um standard filtration or the 5 um W grade for finer protection of downstream equipment; select the gauge - embedded square as standard or an external round gauge scaled in MPa, psi or bar; and order PT (the standard thread), G or NPT. A J-code unit like this one comes without a mounting bracket - choose the bracket variant if you need to panel- or wall-mount. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves rather than a single rated number, so we do not quote a figure here. Tell us your application - port size, downstream demand and line pressure - and we will confirm the flow data from the datasheet on request before you order.
The M in the code means the condensate in the PC bowl is drained by hand - a good fit where the unit is checked regularly. If the installation is unattended, choose the automatic-drain variant; the differential-pressure drain is the catalogue default. Note that the manual-drain version also gives the widest regulating range, 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.