The AirTAC GFR20006MJF2TK AirTAC Filter Regulator NPT1/8 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MJF2TK is a size GFR200 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one compact body. This configuration has a 1/8 in NPT port, a manual drain bowl in polycarbonate, a standard 40 um filter element, an embedded square gauge scaled in psi, a built-in reverse/check valve, and is supplied without a mounting bracket. The manual drain means the bowl is emptied by hand, and the regulation range for this drain type is 0.05-0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR filter-regulator line is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drains, an optional 5 um element (code W), gauge scale options, G/NPT thread variants and optional brackets. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application on request.
| Model | GFR20006MJF2TK AirTAC Filter Regulator NPT1/8 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use conditioning on a small CNC machining centre or tool presetter: the 1/8 in NPT port feeds compact air circuits, the 40 um element stops scale and pipe debris reaching solenoid valves, and the psi gauge gives the operator a direct reading at the machine.
Mounted inside a control panel or valve manifold cabinet, this unit filters the branch feed and holds a steady regulated pressure to pilot-operated valves and positioners, with the check valve maintaining the downstream circuit if the main supply is interrupted.
On a lab test bench or small pilot rig, the regulator lets a technician dial in and read a stable test pressure in psi while the 40 um element and drain bowl keep moisture and particles out of sensitive instruments and pneumatic fixtures.
Start with the port step: the GFR200 size in 1/8 in suits the smallest branch lines, and stepping up through GFR300/400/600 gives larger ports for higher air demand - match the size to the flow your line needs rather than to the pipe alone. For the bowl, manual drain (this unit) suits positions someone walks past regularly; choose automatic or differential-pressure drain where the unit is mounted in a hard-to-reach spot. The standard 40 um element covers general plant air; specify the W option for 5 um where downstream equipment needs finer filtration. The embedded square gauge here reads in psi (MPa and bar scales are also available), and the fitted check valve holds downstream pressure if the upstream supply drops. Thread is NPT on this code, with G(BSPP) and PT available as catalogue options; a bracket can be added on other codes. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your line pressure and air demand and we will confirm the sizing from the datasheet curves on request before you order.
The M in the code specifies a manual drain bowl: collected condensate is emptied by hand rather than automatically. That suits accessible mounting points on a regular walk-round. If the unit will sit somewhere hard to reach, the same GFR200 size is available with an automatic (code A) or differential-pressure (blank) drain, and the manual-drain version carries the wider 0.05-0.9 MPa (7-130 psi) regulation range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.