The AirTAC GFR20006MLC2W AirTAC Filter Regulator PT1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MLC2W is a GFR-series filter regulator: water and particulate filtration plus downstream pressure regulation combined in a single body. This unit is built on the GFR200 size with a PT1/8 (1/8 in) port, a 5 um filter element (the W grade, finer than the 40 um standard) and a manual drain, so condensate collected in the polycarbonate (PC) bowl is released by hand rather than automatically. It is the low-pressure type regulator, fitted with a round psi gauge, and includes a mounting bracket.
This is a genuine AirTAC part. The GFR family runs in four sizes (200, 300, 400 and 600) with ports from 1/8 in to 1 in, and options for drain type, filter grade, gauge style and scale, G or NPT thread, and bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR20006MLC2W AirTAC Filter Regulator PT1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use filtration and regulation for a compact pneumatic clamp fed from a shop air line; the 1/8 in port and low-pressure setting suit a small cylinder working at the fixture.
Filtered, regulated air for gauges and small actuators on a test bench, where the 5 um element helps protect sensitive components and the psi gauge gives a direct local reading.
Regulated supply to a single module of a packaging line with small valves and actuators, with the manual drain checked during routine changeover and cleaning.
Choose the size by port and flow: GFR200 is the smallest step, with a 1/8 in port on this unit; step up to GFR300, GFR400 or GFR600 when the line needs a larger port and more flow at the same setting. Drain is a real choice: manual (this unit) suits installations you visit regularly, while automatic or differential-pressure drains suit unattended duty. The 5 um element (W) is the finer grade; the 40 um standard element suits general supply air. The round psi gauge is fitted here; embedded square gauges and MPa or bar scales are alternatives. Thread is PT as standard, with G (BSPP) and NPT available to order, and a bracket is included. Flow figures are published as curves, not a single rating, so send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your required flow and working pressure and we will confirm the datasheet curve for the GFR200 size before you order.
The L code makes this a low-pressure regulator, intended for circuits set below the standard range; the exact setting range is not published, so confirm it with us. The M code is the manual drain: condensate is released by hand, which suits attended installations, while automatic and differential-pressure drains are available on other GFR codes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.