The AirTAC GFR20006MLJC2WT AirTAC Filter Regulator NPT1/8, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20006MLJC2WT is a GFR200-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This configuration is built for low-pressure duties, where the set point sits at the lower end of the working range. It carries a 5 um filter element (the finer of the two published grades), a manual drain for the polycarbonate bowl, a round external pressure gauge scaled in psi, and 1/8 in NPT ports. No mounting bracket is fitted and no reverse/check valve is included.
This is a genuine AirTAC part. The GFR family is published in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge styles and scales, and PT, G or NPT threads. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the flow and datasheet figures for your application before ordering.
| Model | GFR20006MLJC2WT AirTAC Filter Regulator NPT1/8, 5 um |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
On a carton-sealing or case-packing line where clamp cylinders run at low set pressures, this filter regulator cleans the supply through its 5 um element and holds a gentle, adjustable downstream pressure, with the round psi gauge giving a clear local readout at the machine.
Bench-top test rigs and analytical instruments with sensitive pneumatic components benefit from the finer 5 um filtration and stable low-pressure regulation this unit provides, with manual drain allowing controlled bowl bleeding between runs in a supervised environment.
At an individual workbench or small assembly cell fed from a shop-air drop, the compact GFR200 body with 1/8 in NPT ports filters water and particulate and regulates pressure for air tools, small actuators and blow-off duties, while the manual drain suits stations that are shut down and bled daily.
Size up by port and flow: this unit is size 200 with 1/8 in NPT ports, the smallest step in the GFR range; step up to GFR300/400/600 ports if your air demand is higher. Drain choice matters: manual drain needs an operator to bleed the bowl, while automatic and differential-pressure drains self-bleed - this unit is manual. Filter grade: 40 um is standard and 5 um (code W) is the finer option fitted here, suited to more sensitive downstream equipment. Gauge: an embedded square gauge is standard, with an external round gauge optional, in MPa, psi or bar scales - this unit has a round psi gauge. Thread is PT as standard, with G and NPT as order options; this unit is NPT. A bracket is optional (not fitted here). Flow for the series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and air demand and we will confirm the flow figures from the datasheet for this exact model on request.
The bowl collects water and particulate separated from the air, and the drain lets you remove it. This model has a manual drain, so an operator opens it to bleed the bowl. If you prefer self-draining, the GFR family is also available with automatic or differential-pressure drains - we can quote the equivalent configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.