The AirTAC GFR20008LC3TK AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20008LC3TK is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 200 unit is the low-pressure regulator type, fitted with a 1/4 in NPT port, a 40 um filter element, a differential-pressure drain on the PC (polycarbonate) bowl, a round gauge reading in bar, and a built-in check valve; the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is offered in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and with choices of drain type, 40 um or 5 um filtration, gauge style and scale, PT, G or NPT thread, and bracket or no bracket. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR20008LC3TK AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
On a finishing line, this unit conditions the air feeding spray guns: the 40 um element strips water and dirt before the gun, the low-pressure regulator holds a gentle setting, and the check valve keeps the downstream side from back-feeding the supply.
Thin-sheet weld fixtures often need clamp cylinders run at reduced pressure so the workpiece is held without distortion. This filter regulator cleans the shop air and holds that low setting at the clamp circuit, with the gauge giving a direct bar reading.
Carton-closing and labelling heads on a packaging conveyor use short-stroke cylinders that run best on filtered, low-pressure air. This unit supplies both in one body, and the differential-pressure drain clears condensed water from the bowl as the line runs.
Size 200 with a 1/4 in NPT port suits circuits plumbed at 1/4 in; step up to size 300, 400 or 600 where the line carries more flow. This code fixes the low-pressure regulator type, a 40 um element (5 um is available as code W), a differential-pressure drain (automatic and manual drains are order options), a round bar-scale gauge, and an integrated check valve. Thread here is NPT; PT is the standard and G (BSPP) is also orderable. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes G-series flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the datasheet flow curve and correct sizing for this unit on request.
The L in the code marks the low-pressure regulator type, intended where the downstream setting sits below what a standard unit covers; we confirm the exact adjustment range from the datasheet on request. The drain position is blank, which specifies the differential-pressure drain: the PC bowl sheds accumulated water automatically as the pressure differential builds, with manual (M) and automatic (A) drains available as order options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.