The AirTAC GFR20008MC2T AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR20008MC2T is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single compact body. This 200-size unit is threaded 1/4 in NPT, carries the standard 40 um filter element, and uses a manual drain, so condensed water is released by opening the drain valve at the bottom of the bowl during checks. A round pressure gauge scaled in psi is fitted for direct setpoint reading, and the standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C (non-freezing). The bowl on this size is polycarbonate (PC), and a mounting bracket is included.
This is a genuine AirTAC part. The GFR filter-regulator line spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and is available with manual, automatic or differential-pressure drains, a 5 um element (code W), square or round gauges in MPa, psi or bar scales, a reverse/check valve, and G (BSPP), NPT or PT threads. Flow figures for this series are published as curves rather than a single rating, so contact us and we will confirm the datasheet and sizing for your application on request.
| Model | GFR20008MC2T AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/4" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/4" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-08 (two-unit set) |
Feeding clean, regulated air to a benchtop pneumatic press or clamping fixture, where the operator sets the working pressure on the psi gauge and drains the bowl during routine checks.
Point-of-use air prep on a packaging or labelling line, protecting downstream directional valves and cylinders from water and particulate while holding a steady regulated supply.
Built into an OEM control panel or manifold cabinet as the filter-regulator stage ahead of solenoid valves, with the included bracket fixing the unit beside the other air-prep components.
Choose the size by the port and flow step you need: this 200-size unit takes 1/4 in NPT; larger sizes move up through 3/8, 1/2, 3/4 and 1 in with correspondingly higher flow capacity. Drain type is a real decision: manual drain (this unit) suits installations where someone checks the bowl periodically; automatic drain suits unattended points; differential-pressure drain is the catalogue default. Filter grade is 40 um standard for general air prep, or 5 um (code W) where finer protection is needed. The fitted round gauge here reads in psi; square embedded gauges and MPa or bar scales are alternatives. Thread is NPT on this unit; G (BSPP) and PT are the other catalogue options. A mounting bracket is included.
One honest note before ordering: flow for the GFR series is published as curves, not a single rated figure, so we cannot quote one number here. Ask us to confirm the datasheet and check the sizing against your application before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote one number. Contact us and we will confirm the datasheet and check the flow against your application before you order.
The M in the code specifies a manual drain: condensed water collects in the polycarbonate bowl and is released by opening the drain valve during inspection. Choose manual drain where the unit is accessible and checked regularly; automatic or differential-pressure drains are the catalogue options for unattended installations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.