The AirTAC GFR300-10 AirTAC Filter Regulator, NPT 3/8 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300-10 is a 300-size filter regulator that removes water and particulate from compressed air and sets downstream pressure in one compact body. This configuration has a 3/8 in NPT port, 40 um standard filtration, a manual drain bowl in polycarbonate, and no gauge fitted, so you can mount it where a separate gauge or none at all is preferred. The manual drain lets an operator bleed collected condensate on demand, and the included bracket gives a fixed mounting point. Maximum inlet pressure is 1.0 MPa (145 psi), the setting range is 0.05-0.9 MPa (7-130 psi), and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of manual, automatic or differential-pressure drain, an optional 5 um filter element (code W), gauge and thread options, and low-pressure variants. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures against your application before ordering.
| Model | GFR300-10 AirTAC Filter Regulator, NPT 3/8 in |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Conditioning and regulating the air feed to a pneumatic press or clamping fixture in a stamping or forming cell, where clean, dry air at a set pressure keeps cycle behaviour consistent.
Feeding filtered, regulated air to cylinders and grippers on a bottling or cartoning conveyor line, with manual drain-down at shift end or during changeover.
Point-of-use conditioning at a workshop drop or test bench, protecting hand tools, blow guns and small actuators from water and debris in the shop air main.
Size and port step up together: 200, 300, 400 and 600 cover larger ports and more flow, so pick the size whose flow curve covers your demand at working pressure rather than matching port size alone. For this unit the choices are already fixed: 300 size, 3/8 in NPT thread, 40 um element, manual drain, no gauge, standard pressure range, bracket included. If you would prefer automatic or differential-pressure draining, a fitted gauge, a 5 um element, a PT or G thread, or another size, those are catalogue options on adjacent codes - tell us and we will point you to the right one. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and air demand and we will confirm from the datasheet whether the 300 size at 3/8 in covers your application before you order.
The M in this code means a manual drain: an operator opens the drain to release collected condensate, which suits attended installations and periodic drain-down. If the unit will sit unattended, automatic (code A) or differential-pressure (blank) draining is available on other GFR300 codes - ask us and we will identify the right variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.