The AirTAC GFR30008AJF2WG AirTAC Filter Regulator G1/4 5 um Auto Drain is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/4" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30008AJF2WG is a GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single 300-size body with a G1/4 (1/4 in) port. This configuration carries the 5 um filter element (code W) for finer filtration than the standard 40 um grade, an automatic drain that expels collected condensate from the polycarbonate bowl without manual attention, an embedded square gauge reading in psi, and the standard regulator with an adjustment range of 0.15-0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). No mounting bracket is fitted (code J).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, square or gauge options in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR30008AJF2WG AirTAC Filter Regulator G1/4 5 um Auto Drain |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/4" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-08 (two-unit set) |
Cleaning and regulating the shop-air feed to a machining centre's pneumatic tool-changer and clamping circuits, where the 5 um element protects fine valves and the psi gauge gives operators a direct setpoint readout.
Conditioning the air feeding conveyor stopper cylinders and diverters on a packaging line, with the automatic drain keeping condensate out of the actuators during unattended shifts.
Filtering and regulating the air supply to spray guns in a finishing booth, where the 5 um grade reduces particulate carryover and steady regulated pressure supports a consistent finish.
Choose the 300 size with its 1/4 in port when your line sits in the mid flow band; step up to 400 or 600 for larger demand or down to 200 for compact circuits, and confirm the match against the published flow curves rather than a rated figure. This unit already carries the finer 5 um element (W) instead of the standard 40 um grade, the automatic drain instead of differential-pressure or manual, and a square gauge scaled in psi (MPa and bar scales are also available). The G thread is the BSPP option; PT is the standard thread and NPT can be ordered. No bracket is fitted with the J code, so plan your mounting accordingly.
Because flow is published as curves and not a single rating, send us your application details and we will confirm sizing and the datasheet figures before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and datasheet figures for this 300-size, G1/4 unit on request.
In the code GFR30008AJF2WG, the A position selects the automatic drain, which expels condensate from the polycarbonate bowl without manual intervention, and the W position selects the 5 um filter element instead of the standard 40 um grade. Both choices suit installations that run unattended or feed sensitive downstream equipment.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.