The AirTAC GFR30015AC1T AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR30015AC1T is a 300-size filter regulator that removes water and particulate from compressed air and sets downstream pressure in one body, on a 1/2 in NPT port. This configuration carries the 40 um standard filter element, an automatic drain that ejects collected condensate without manual attention, and a round pressure gauge with an MPa scale so the set pressure is visible at the unit. The standard regulator covers an adjustment range of 0.15-0.9 MPa (20-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi), and the polycarbonate bowl suits operating temperatures from -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 in, and with choices of drain type, 40 um or 5 um (W) filtration, gauge style and scale, thread form (PT standard, G and NPT as options) and bracket. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GFR30015AC1T AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Feeds clean, pressure-set air to the tool-change clamps and pneumatic actuators on a machining centre, with the automatic drain keeping condensate out of the valves during long unattended runs.
Conditions the air feeding diverter and pusher cylinders on a packaging conveyor, holding a steady regulated pressure so divert timing stays repeatable shift after shift.
Serves as the filter-regulator stage at the drop of an assembly cell, protecting downstream air cylinders and control valves from water and swarf while the MPa gauge gives operators a visible setpoint.
Step up or down through the 200/300/400/600 size ladder to match the port and the flow your line needs - the 300 size with a 1/2 in NPT port sits mid-range. Choose the drain to suit access: automatic (this model) for unattended duty, manual where you prefer scheduled blows-down, or the differential-pressure default. Pick 40 um for general air preparation or the 5 um (W) element where finer particulate removal matters. Gauge style (embedded square or external round) and scale (MPa, psi or bar - this unit ships with a round MPa gauge) follow your local reading habit, and thread is PT as standard with G and NPT as order options; a mounting bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application details and we will confirm the flow curve and correct sizing from the datasheet on request.
The A in the code GFR30015AC1T means the bowl drains itself automatically, which suits units mounted in awkward or unattended positions. A manual drain (code M) is the choice where you want scheduled blow-downs, and the differential-pressure drain is the catalogue default. Note that with the automatic drain the regulator adjustment range is 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.