The AirTAC GFR30015MLC2 AirTAC Filter Regulator PT1/2 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/2" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR30015MLC2 is an AirTAC GFR300 filter regulator: water and particulate filtration plus pressure regulation combined in one body. This configuration is a 1/2 in PT-threaded unit with a manual-drain polycarbonate bowl, a 40 um filter element, the low-pressure regulator type, a round pressure gauge reading in psi, and a mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options across the series include automatic, manual or differential-pressure drains, a 5 um element (code W), embedded square or external round gauges with MPa, psi or bar scales, G (BSPP) or NPT threads, and bracket choices. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR30015MLC2 AirTAC Filter Regulator PT1/2 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT1/2" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT1/2" · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-15 (two-unit set) |
Feeds fixture clamps on a machining centre that run at reduced pressure, removing water and particles from the supply and holding the set downstream pressure at the clamps.
Conditions the air feeding the cylinder bank on a cartoning or filling line, filtering the supply and setting the working pressure before the actuators.
Delivers filtered, pressure-set air to spray guns in a finishing booth, with no oil mist added downstream of the unit.
The real choices in this series are decodable from the code. Step the size (200/300/400/600) and port (1/8 to 1 in) against the flow your line needs - we confirm the curve figures before you order. Choose the drain: manual (this unit, code M), automatic (A) or differential-pressure (the default). Filter grade is 40 um standard; specify W for 5 um. An embedded square gauge is standard and an external round gauge is optional, with MPa, psi or bar scales - this unit carries a round psi gauge. Thread is PT as the standard, with G (BSPP) and NPT as order options. The L in this code selects the low-pressure regulator type for circuits working well below standard pressures; its exact range is not published, so confirm it with us. A mounting bracket is included on this unit.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow figures from the datasheet before you order.
L marks the low-pressure regulator type, selected for circuits working well below standard pressures. The exact adjustment range for the low-pressure version is not published in the catalogue, so confirm it with us rather than assuming the standard GFR300 range applies.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.